ANTC-V1
1 / 4Pages

Catalog excerpts

Anemometer cups with pulse output for industrial application SIT certificate The series ANTC has been designed and built for industrial applications, in particular:    Measurements for wind turbines Historical analysis of data logger Control thresholds for wind and solar sails solar trackers However, it is used in any area where they are necessary features of reliable, robust and accurate. The body of the rotor is machined aluminum. The head rotates on ball bearings. The cups are made of stainless-steel shock-absorbent and easily interchangeable. It also has a connector for convenient connection. The generation of pulses is via optical transducer, a digital encoder with 12 pulses per revolution. EACH TRANSDUCER IS TESTED IN A WIND TUNNEL EQUIPPED WITH A CALIBRATION CERTIFICATE. It runs on request, a periodic calibration and calibration product. Anemometer ANTC- V1 has been specifically designed for industrial applications such as:  Cranes and Mobile Cranes  Buildings and general structures  Photovoltaic solar trackers  Wind turbines  Weather Stations  Irrigation systems  Automated greenhouses  Cable cars for ski plants  Cannons snow  Telescopic cranes  Platforms self-mounting  Structures for playgrounds  Ornamental fountains  Pressostatic structures  Highway tunnels and viaducts 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 i

Open the catalog to page 1

Anodized aluminum rotating transducer mounted on double ball bearing complete with stainless steel bracket and female socket connector Assembled by ± 3° from vertical axes. Cups upwards. Range of use 0-200km/h Frequency output signal with 12 pulse for revolution Optic transducer which provides the generation of pulses 12/24 Vdc power supply 3 pins to solder jack connection Mechanical Features The anemometer consists of aluminum body and rotor with a removable hat for the mechanical seal of a Nylon Cups shockproof, UV ray, low temperature and hailstorm resistant. Rotating on a Ball Bearings,...

Open the catalog to page 2

Operation It can be connected through the frequency output directly to PLC and / or board electronic market. The anemometer ANTC-V1 has the following input/output characteristic tested and certified in the wind tunnel: Speed [m/s] Hz 2,5242 4,9604 9,9997 14,9738 20,0083 24,9896 29,9868 35,0554 40,0686 44,9921 49,9549 54,9639 3 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it

Open the catalog to page 3

Accessories Nylon Cups Reinforced for hail, resistant from -40°C to +120°C, diam. 30mm, interchangeable. In the kit are included 3+1 stock cups Stainless-steel bracket Already assembled. Dimensions: height 42mm, width 39mm. Connector 3 poles to be weld Optional Items Connecting cable Transducer connection cable provided in the required lenght Cable Cable welding and pre-wiring It is possible to match the anemometer with a programmable 2 relay outputs display to see data in an immediate way and provide the alarm. 4 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel....

Open the catalog to page 4

ANTC-V1 1 / 4Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

ANTC-V1
1 / 4Pages