WEATHER VANE Rotary Anemoscope with weather vane and analog output for industry-standard The series ANTC has been designed and built for industrial applications, in particular:    Measurements for wind turbines Historical analysis of data logger Control thresholds for wind and solar sails solar trackers However, it is used in any area where they are necessary features of reliable, robust and accurate. The body of the rotor is machined aluminum. The head rotates on ball bearings. The weather vane is made of stainless-steel shock-absorbent and easily interchangeable. It also has a connector for convenient connection EACH TRANSDUCER IS TESTED IN A WIND TUNNEL EQUIPPED WITH A CALIBRATION CERTIFICATE. It runs on request, a periodic calibration and calibration product. Anodized aluminum rotating transducer mounted on double ball bearing complete with stainless steel bracket and female socket connector  Assembled by ± 3° from vertical axes. Vane upwards  Analogic signal output  Measurement range from 1° to 360°  Operating temperature from -10°C to +60°C  Storage temperature da -30°C a +80°C  Nylon string wing hail resistant from -40°C to +120°C  Interchangeable wing (1+1 wing in every kit)  Male connector 3 poles to be weld Dimensions  Body rotor: H 112 mm  Body rotor + support: H 152 mm  Diam. min. top body rotor: 29 mm  Diam. max. bottom body rotor: 39 mm  Diam. max. rotating head with vane assembled: 150 mm  Stainless steel support assembled. Dimensions: H 50 mm / W 40 mm 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 032

WEATHER VANE Electrical Features Items Power supply Nominal Current Output signal tension Proportional from 0,51 to 4,5 Vcc complete revolution 360° Connection jack connector welding side view: 1=0v GND 2=+12 Vcc 3=output signal Special Connector M12 5 PINS Model Accessories Nylon Wing Reinforced by the hail, resistant from -40°C to +120°C, interchangeable. In the kit are included 1+1 stock wings Connector 3 poles to be weld Stainless-steel bracket Already assembled. Dimensions: height 42mm, width 39mm. 2 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574...

WEATHER VANE Connecting cable Transducer connection cable provided in the required lenght Cable Cable welding and pre-wiring 3 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 [email protected] www.nuovaceva.it