ANTC-09
3Pages

Catalog excerpts

Control Unit for wind speed and direction double transducer and multifunction program ANTC-09 is the last multifuncional control unit designed to meet a lot of requests coming from new industrial sectors as: wind flow control for viaducts, tunnels cableways, chemical industry and other specific applications as in the ornamental fountain sectors, where is necessary to associate the activation of relay thresholds and/or the proportional value of analog output, to the degrees of wind direction. This functions is named SET ANGLE WIND DIRECTION. ANTC-09 can be configured to control 2 wind speed transducer and 2 wind direction transducer (2 anemometer ANTC-V1 + 2 anemoscope ANTC-D1), ehich can work separately or together for redundant control. ANTC-09 versatility allows the operator to use a wide range of functions, based on researches carried out in several application sectors:  wind speed thresholds with adjustable minimum and maximum value  wind direction thresholds with adjustable minimum and maximum value  self-diagnostic test for relays and sensors with anomaly detection alarm  sensors redundant control with anomaly detection alarm  4 analog outputs (0-10 vdc / 4-20 ma) with adjustable span and load resistance value setting  adjustable delay time to activation and deactivation of relay contacts  set units of measurement (m/s - km/h - mph)  power-on self-test  reversible output contacts  usb port to connect pc Backlit Display USB port by industrial connector 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it

Open the catalog to page 1

Supply 12/24 Vac / dc with jumper selection Current absorption: 1. 24 Vac: st.by 59 mA - 20 mA each relay on - 3 mA on each input 2. 24 vdc: st.by 70 mA - 23 mA each relay on - 3 mA on each input 3. 12 vac: 115 st.by mA - 35 mA each relay on - 3 mA on each input 4. 12 VDC: 125 st.by mA - 38 mA each relay on - 3 mA on each input Base for mounting on DIN rail Overall size 136 mm x 82 x 52 2 digital inputs dedicated frequency for anemometer ANTCV1 2 analog inputs dedicated for live anemoscope ANTC-D1 4 analog outputs 0-10 Vdc / 4-20 mA proportional to the dedicated transducers (1 for each...

Open the catalog to page 2

Optional Items Power supply Stabilized 220 Vac / 12Vdc-2A The software ANEMOSTAT_CONSOLE_09 is included in the supply unit ANTC-09. Useful tool for viewing real-time measurements of the speed and direction of 2 pairs of anemometers / anemoscope, programming of functions. 3 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it

Open the catalog to page 3

ANTC-09 3Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

ANTC-09
3Pages