*mydirectindustry

Catalogs
NUOVA CEVA Automation
ANEMOSCOPE ANTC_D2.2

ANEMOSCOPE ANTC_D2.2

Product catalog summary

Overview: The document provides technical specifications and operational details for the ANTC_D2.2 wind vane anemoscope, designed by Nuova CEVA Automation for industrial applications. It includes information on its features, operation, and wiring.

Main Features:

Advanced wind vane anemoscope with analog signal output (4-20 mA).
Constructed from aluminum, resistant to water, dust, and UV rays.
Capable of measuring wind speeds up to 200 km/h.
Power supply requirement: 10-30 Vdc.
Designed for use in various industrial applications such as irrigation systems, greenhouses, solar trackers, and meteorological stations.

Operation:

The device measures wind direction and outputs an analog signal corresponding to the direction angle.
Wind direction is indicated by an analog output ranging from 4 mA (South) to 19 mA (South-Southeast).
Static wind conditions are indicated when wind speed is less than or equal to 3 km/h.

Technical Specifications:

Resolution: 0.5° with an accuracy of ±1%.
Operating temperature range: -20°C to +85°C (free of ice).
Storage temperature range: -40°C to +125°C.
Weight: Approximately 300 g.
Load impedance: Less than 500 ohms.

Wiring and Connection:

Uses a 3-wire connection for positive, negative, and output signal.
Connector type: M12 5 PIN.
Wind vane orientation requires alignment towards NORTH for accurate readings.

Catalog excerpts

NUOVRgig • Advanced wind vane anemoscope with analog signal output. • M a g net i c s e n s o r . • Power supply: 10-30 Vdc. • Aluminun. • Up to 200 km/h wind speedEasy connection. Advanced wind vane anemoscope with a robust, compact and modern design. Made of aluminum and high technical quality. Resistant to water, dust and UV rays. The wind direction sensor ANTC_D2.2 has been designed for industrial applications. Connected to devices such as data acquisition systems, PLCs, analogue signal displays that measure the wind direction, they record and / or activate predefined alarm levels. Examples of use: irrigation control systems, automation in greenhouses, solar trackers, ski resort lifts, cranes, wind turbines, climatic and meteorological stations. Wind speed graphic report with analog output 4-20 mA • Up to 200 km/h wind speed • Power supply: 10 - 30 Vdc • Outut: Analog = 4-20 mA (see the table below) 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 [email protected] www.nuovaceva.it

Open the catalog to page 1

To orient the wind vane towards NORTH, align the fixing bracket perpendicular to the NORTH. The wind vane must be oriented towards NORTH and its output signal corresponding to 12 mA will conform to the angles and directions of the board. Wind vane orientation: Power supply Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 [email protected] www.nuovaceva.it

Open the catalog to page 2

ANEMOSCOPE ANTC_D2.2

ANEMOSCOPE ANTC_D2.2

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures