
Catalog excerpts

FREQUENCY OUTPUT ANEMOMETER - wind speed measure for low temperature and Ice APPLICATIONS The heating system of which the device is fitted, ensure the normal operation and even in the presence of snow and ice. The ANEMO4H25, can detect the wind speed even under extreme climatic conditions. The integrated heating system, in fact, prevents the formation of snow and ice deposits on top of the appliance, ensuring the smooth operation up to a minimum of temperature equal to -25 ° C. Also for this reason, it is the optimal solution for all those applications relating to the wind speed detection in extreme conditions. Easy to use and small size, is particularly suited to be employed as a transducer for our WM44-P control unit. However, thanks to its great versatility, it is easily adaptable to a wide range of instruments for the visualization and control. The output is constituted by a contact N.O. and equipped with a series resistor, which is operated at a frequency directly proportional to the measured speed. It can be connected directly to PLC and / or market electronic, tachometers and WM44P as the model of our product range. It is produced in the following versions: - Pulse output with cable cast 20 meters out from the bottom CONNECTION Model ANEMO4H25 with cable cast 20 meters Input / output Operation Example 2 wire connection: Input / output Operation Example 2 wire connection for PLC: Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it
Open the catalog to page 1
FREQUENCY OUTPUT OPERATION Until 200Km/h of wind speed. Input: power supply 5-24 Vdc Output: Reed contact with serial resistor that switch with proportional frequency / wind speed (see graphic). Wind speed / output relation. Wind speed = 0Km/h ANEMO4H25 output = 0 Hz. Wind speed = 100Km/h ANEMO4H25 output = 105 Hz (pulse per second). MECHANICAL & ELECTRICAL FEATURES The anemometer consists of a rotor of plastic impact and UV resistant, low temperatures and hail. Rotating on ball bearings, drives a 4 magnetic contact generating pulses. Degree protection of enclosure IP65...
Open the catalog to page 2All NUOVA CEVA Automation catalogs and technical brochures
-
ANEMO4403 V3 RELAY-ALARM
2 Pages
-
ANEMO4403 | HZ
2 Pages
-
ANTC-V1
4 Pages
-
WM44-EVO11 V3
2 Pages
-
ANEMOSCOPE ANTC_D2.2
2 Pages
-
Winch Cranes
1 Pages
-
Derrick Cranes
1 Pages
-
Gantry Cranes
1 Pages
-
Head Cranes
1 Pages
-
Tower Cranes
1 Pages
-
EXD (ATEX) type slip rings
2 Pages
-
ANTC-V2.2
4 Pages
-
PRR-ROLLER type slip rings
2 Pages
-
FRM Rotary Limit Switch
6 Pages
-
PME type slip rings
2 Pages
-
SAG105WR-5142-2SC
5 Pages
-
ANEMO4403-Frequency ouput
3 Pages
-
ARES Series
2 Pages
-
Large L15- Large L99
1 Pages
-
Small S3- Small S6
1 Pages
-
Saga V6
3 Pages
-
SAGA-L Series
4 Pages
-
SAGA-LB Series
4 Pages
-
FRS rotary limit switch
5 Pages
-
PMP type slip rings
2 Pages
-
PMS type slip rings
2 Pages
-
PRG-90 type slip rings
2 Pages
-
PRM type slip rings
1 Pages
-
WAVE series
2 Pages
-
ZEUS series
2 Pages
-
ANTC-D1
3 Pages
-
Wind Analysis
3 Pages
-
WM44-P control unit
5 Pages
-
FCN rotary limit switch
6 Pages
-
ANEMO4403 - Analogic Output
3 Pages
-
ANEMO4403-RF-BAT Wireless
6 Pages
-
ANTC-IDV32
3 Pages
-
ANTC-09
3 Pages
-
PZG type slip rings
2 Pages
-
PSP type slip rings
1 Pages
-
PSG 200 type slip rings
1 Pages
-
PSG 160 type slip rings
1 Pages
-
PSG 130 type slip rings
1 Pages
-
PRS type slip rings
2 Pages
-
PRP type slip rings
2 Pages
-
SAG105WR
4 Pages
-
WM44-SS Small Control Unit
4 Pages
-
WV4403
3 Pages
-
WM44-DRM
4 Pages
-
antc-idv
2 Pages