REFERENCES AND VERSIONS References BS100/3 4-20mA (multifunction display large size 3 digitis) BS100/4 4-20mA (multifunction display large size 4 digitis) BS100/5 4-20mA (multifunction display large size 5 digitis) *Only for 4-20mA OUTPUT version Stainless steel bracket AISI 304 Stainless steel bracket plus hardware for mounting the wind sensor on the backet Magnets for flat ferromagnetic surfaces. This fixation system can support up to 90 kg Other devices of ANEMO4403 V3 range 2 steel clamps kit that can be fixed to irregular parts measuring up to 63 x 45 mm 10 unit minimum order. On sale exclusively with wind sensor. *For other references, please contact us. ANEMO5H25 V3 4-20mA OUTPUT 180km/h M12 UNDERSIDE NO FEMALE CONNECTOR ANEMO4403 V3 0-10V OUTPUT ANEMO4403 V3 4-20mA OUTPUT ANEMO4403 V3 Wind speed sensor designed for different industries and sectors. ANEMO4403 V3 ANALOGUE OUTPUT is an analogue output anemometer, with 0-10V and 4-20mA versions. Output proportional to the wind speed with a full scale of 120 km/h or 180 km/h. CA-01030109/10 (24/05/2018) All dimensions and sizes are approximate. Specifications and prices are subject to change without notice. Industrial design for extreme environments Analogue output (4-20 mA or 0-10 V) Stainless Steel bearings Low consumption

TECHNICAL FEATURES 4-20 mA OUTPUT Electrical features Power supply Maximum current ANEMO4403 V3 has been designed for industrial applications: cranes, solar panels, wind turbines, weather stations… It is usually connected to devices such as displays (see our references WM44- EVO11, V12, BS100/X, WM44-P AI), PLCs or dataloggers to display the wind speed and/or set alarms to predefined values or to obtain records during predefined periods of time. The wind sensor must be fixed on a vertical position. Starting speed Maximum connectable impedance Survival speed Power supply WIND SPEED - OUTPUT RATIO...