Catalogs >
NUOVA CEVA Automation >
ANEMO4403-RF-BAT Wireless

ANEMO4403-RF-BAT Wireless
6Pages

Catalog excerpts

ANEMO 4403 Radio impulsive output Anemometer - Wireless Robust wind speed sensor,extremely resistant and flexible, Suitable for many different application. Stainless steel bearings and high quality technical plastic body and cups. The RF communication compliant to IEEE 802.15.4 standards, operating within the ISM 2.4 GHz frequency band. Developed to be connected to display WM44-P-RF. Totally Plug & Play system, no configuration needed. More than one equipment can operate in the same enviroment, no risk of interaction/interference. Suitable for any industrial application ANEMOMETER 4403-RF-BAT Range of use from 2 to 200 km/h Great mechanical strength and high flexibility The Anemo4403 RF, is suitable to be used for any application where it is Shockproof necessary to accurately detect the wind speed such as: tower cranes, solar Industrial communication system using radio frequency 2.4 GHz (IEEE 802.15.4) panels, greenhouses, wind generators, etc. but needs quick mounting and Rotor mounted on ball bearings in stainless steel wireless system. Jointly the display WM44-P RF, in addition to the instantaneous velocity detected, you can store the minimum and maximum peak values. It also has 2 alarm thresholds speed programmable relay outputs and an analog output proportional 4-20mA.       Suitable for any industrial application Range of use from 2 to 200 km/h Great mechanical strength and high flexibility Shockproof Industrial communication system using radio frequency 2.4 GHz (IEEE 802.15.4) Rotor mounted on ball bearings in stainless steel 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuo

Open the catalog to page 1

INTRODUCTION The WM44-P RF wind speed indicator, combines a highly accurate indicator with dual set point alarm relays. Specially designed to be used in combination with ANEMO4403 RF wind sensor. 2 programmable set points (ALARM 1 & ALARM 2). It can be easily mounted in any instrument panel, cabinet door, and various industrial enclosures. WM44P RF has been designed for home and industrial applications such as: cranes, PV panels, green houses, wind turbines, etc.  3 digit LED display (14 mm digit height).  2 LED alarm status indicator (AL1 & AL2).  LED speed unit indicator (Km/h or Mph)....

Open the catalog to page 2

PROGRAMMING MODE To access the configuration buttons, lever up the frontal cover in the lower crack indicated by “open to program”. To enter the configuration mode, press Enter and Escape buttons simultaneously for more than 2 seconds. Function buttons in programming mode: Button Increase program steps (P00,P01..), options or thresholds to program Decrease program steps, options or thresholds to program Enter into the program step where it is located, validate options and thresholds and escapes to step program. Return to program steps. In range, it selects the digit to modify Program steps:...

Open the catalog to page 3

Anemometer Technical Features Power supply 9-24 Vcc Max. Input current 100mA max Measuringr Range 2-200 km/H RF 802.15.4,2.4 GHz Anemometer Mechanical Features The anemometer is constituted by a rotor in shockproof plastic material resistant to UV rays, at low temperatures and hail. Rotating on ball bearings, drives a magnetic contact generating 4 pulses per revolution.         Degree of protection IP65 Operating temperature -20° + 80°C without ice Storage temperature -40° + 100°C Overall size shown in the drawing on the side Weight 154 g Measuring range from 2 to 200 km/h Accuracy...

Open the catalog to page 4

Display Technical Features WM44P - Display 96x48mm - 3 digit  Available input voltage: 12 Vdc - 24 Vdc - 24 Vac - 110/220 Vac 50/60 Hz  Power consumption < 3,5 VA  RF Communication IEEE 802.15.1 ISM 2.4 GHz  Transmission power 10 mW (10dBm)  Receiving sensitivity -100dBm  Operative distance: indoor/urban area 60 mt. – outdoor line-of-sight 750 mt  4-20mA analog output accuracy ±1%  Maximum load impedence 500Ω  Realy contacts 4 A - 250 Vac  Operating temperature -20°C +70°C  Max speed 999 Km/h - 620 mph  IP50  Weight 350 g  Dimensions in the drawing below  Accuracy 1 km/h ...

Open the catalog to page 5

Anemometer Accessories Battery casing Included in the supplu sealed housing containing lithium batteyr, already mounted and wired on the bracket Lithium Battery The lithium battery of the “D” size 3,6 Vdc guarantees a long life service Steel bracket The external wireless device ANEMO4403-RFBAT includes a wall mounting bracket for easy installation on vertical structure Display Accessories Screw connectors The connection of displayis is made through the practical numbered connectors with screw terminals. Support spring The panel mounting is facilitated by a retaining spring that is placed in...

Open the catalog to page 6

ANEMO4403-RF-BAT Wireless 6Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

ANEMO4403-RF-BAT Wireless
6Pages