Catalogs >
NUOVA CEVA Automation >
ANEMO4403-Frequency ouput

ANEMO4403-Frequency ouput
3Pages

Catalog excerpts

FREQUENCY OUTPUT ANEMOMETER sensor for measuring wind speed  Robust, reliable, suitable for heavy duty industrial use in extreme conditions  Range of use 2-200km/h  Stainless steel bearings  Body made of special plastic  Resistant to UV rays and acid rain  Watertight connector for quick replacement  Cable already connected with tight output  APPLICATION The Anemometer ANEMO 4403 has been specifically designed for industrial applications such as: Cranes and Mobile Cranes Buildings and general structures Photovoltaic solar trackers Weather Stations Irrigation systems Automated greenhouses Cable cars for ski plants Cannons snow Telescopic cranes Platforms self-mounting Structures for playgrounds Ornamental fountains Pressostatic structures Highway tunnels and viaducts It can be connected through the various outputs available depending on the model directly to PLC and / or board electronic market, speedometer as WM44P product of our range. It is produced in the following versions: - Frequency output with 2,5 meters of cable cast from the bottom Frequency output with connector screw CONEC G1430 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www

Open the catalog to page 1

FREQUENCY OUTPUT OPERATION Model ANEMO4403_2.0_CONN Model with connector 200Km/h wind speed maximum Input: power supply 5-24 Vdc Output: Reed contact with serial resistor that switch with proportional frequency / wind speed (see graphic). Wind speed / output relation. Wind speed = 0Km/h  Output ANEMO4403 = 0 Hz. Wind speed = 100Km/h  Output ANEMO4403 = 105 Hz (pulse per second). With cable connected the colours will be: Pin 1 – Brown Pin 2 – Black Pin 3 – Free Pin 4 – Grey It incorporates a capacitor which can be connected optionally to the signal filtering. Example 2 wire connection (the...

Open the catalog to page 2

FREQUENCY OUTPUT MECHANICAL & ELECTRICAL FEATURES The anemometer consists of a plastic rotor impactresistant and to UV rays, at low temperatures and hail. Rotating on ball bearings, drives a magnetic contact, generating 4 pulses per revolution. degree of protection of IP65 operating temperature -20° + 70°C storage temperature -35° + 85°C overall dimensions given on the side weight 155 g without cable Measuring range from 2 to 200 km/h Precision +- 2% Linearity +- 2% Power supply from 5 to 24 Vdc from 5 to 24 Vdc Output Signal Frequency – 1,05 Hz / Km/h Frequency – 1,05 Hz / Km/h...

Open the catalog to page 3

ANEMO4403-Frequency ouput 3Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

ANEMO4403-Frequency ouput
3Pages