1. Catalogs
  2. Nufern
  3. Eye Safe 9/125 Thulium-Doped Single-Mode Single Clad Fiber

Eye Safe 9/125 Thulium-Doped Single-Mode Single Clad Fiber
1 /1Page

Eye Safe 9/125 Thulium-Doped Single-Mode Single Clad Fiber

Eye Safe 9/125 Thulium-Doped Single-Mode Single Clad Fiber
1 /1Page

Catalog excerpts

Eye Safe 9/125 Thulium-Doped Single-Mode Single Clad Fiber-1

Eye Safe 9/125 Thulium-Doped Single-Mode Single Clad Fibers This single clad, small core diameter fiber is designed specifically for use in core-pumped cavities. As the fiber is polarization maintaining, it is also suitable for applications requiring linearly polarized output. Typical Applications Features & Benefits • Low/mid power 2 µm CW & pulsed • Small diameter Tm-doped core design — Robust single mode beam quality Eye Safe lasers & amplifiers • May be pumped with 793 nm diodes or resonantly pumped using a fiber laser • Eye Safe industrial & medical lasers • High pump absorption — Short fiber length, efficient lasing in the ~2 µm window • Military & commercial LIDAR • Core pumping facilitates access to shorter lasing wavelengths below 1900 nm • 2 µm fiber lasers for pumping crystal lasers Optical Specifications Operating Wavelength (nominal) Core NA Mode Field Diameter (predicted) Cutoff Core Absorption Birefringence (predicted) PM-TSF-9/125 SM-TSF-9/125 2000 nm 0.150 10.5 µm @ 2000 nm (nominal) 1750 ± 100 nm 9.00 ± 2.00 dB/m at 1180 nm 27.00 dB/m at 793 nm nominal 2.5 × 10⁻⁴ 2000 nm 0.150 10.5 µm @ 2000 nm (nominal) 1750 ± 100 nm 9.00 ± 2.00 dB/m at 1180 nm 27.00 dB/m at 793 nm N/A 125.0 ± 1.0 µm 9.0 µm 245.0 ± 15.0 µm < 20.0 µm ≤ 0.50 µm Dual Acrylate ≥ 100 kpsi (0.7 GN/m²) 125.0 ± 1.0 µm 9.0 µm 245.0 ± 15.0 µm < 20.0 µm ≤ 0.50 µm Dual Acrylate ≥ 100 kpsi (0.7 GN/m²) Geometrical & Mechanical Specifications Cladding Diameter Core Diameter Coating Diameter Coating Concentricity Core/Clad Offset Coating Material Prooftest Level The passive version of each fiber is also available. 7 Airport Park Road, East Granby, CT 06026 • 860.408.5000 • Toll-free 866.466.0214 • Fax 860.844.0210 E-mail info @ nufern.com • www.nufern.com Nufern products are manufactured under an ISO 9001:2008 certified quality management system. Standard specifications and design parameters are listed above. Specifications are subject to change without notice. Other configurations such as alternative form factors, optimized cut-off and UV cured color coating may be available. Let us know how Nufern can assist with your requirements. NU0127- 05/18/2012

 Open the catalog to page 1

Archived catalogs

  1. NuWIRE flyer

    2  Pages

  2. SM-ESF-7/125

    1  Page

  3. NuBENCH

    2  Pages

  4. CMS HP

    1  Page

  5. NuXLMA

    2  Pages

  6. NuEYDF

    2  Pages

  7. NuPULSE

    2  Pages

  8. NuBEAM 400

    1  Page

  9. NuBEAM 600

    1  Page

  10. NuBEAM 150

    1  Page

  11. NuBEAM 100

    1  Page

  12. FUD-4333

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.