Overview

The document provides technical specifications and ordering information for a series of tool holders or adapters, identified by model codes such as MTA1, MTA2, MTA3, MTA4, and MTA5. These components appear to be designed for use with CAT40 and CAT50 tool interfaces.

Specifications

• Model Types: MTA1, MTA2, MTA3, MTA4, MTA5
• Dimensions: Various lengths (L) and diameters (D and D1) are specified for each model, with lengths ranging approximately from 1.77 to 4.13 units (likely inches or millimeters) and diameters from 1.0 to 2.76 units.
• Interface Types: CAT40 and CAT50 tool holders are supported, with specific dimensions for each.
• Part Numbering: Part numbers are constructed based on the model type, length, and diameter, e.g., CAT40-MTA1-45.

Ordering Information

Examples of ordering codes are provided, such as CAT40-MTA1-45 and BT40-MTA1-45, indicating the tool holder type and size. Special features like anti-rust surface treatment are noted as options.

Dimensions and Parameters

The document includes tables listing the following parameters:

• MT (Model Type)
• L (Length)
• D and D1 (Diameters)
• Type 1 and Type 2 classifications, possibly indicating variants or configurations.

Lengths and diameters increase progressively with model number, indicating a range of sizes to accommodate different tooling needs.

Features and Recommendations

• Special anti-rust surface treatment is available, enhancing durability.
• Ordering examples suggest clear coding for specifying the exact tool holder required.

Summary

This document serves as a technical reference for selecting and ordering specific tool holders/adapters compatible with CAT40 and CAT50 interfaces. It provides detailed dimensional data and part numbering conventions to ensure correct specification. The inclusion of surface treatment options indicates attention to product longevity and performance.