Magnetic Induction Heating Device Magnetic Induction Heating Device Hot air type heating device œSpace-saving design œAffordable price œOperated by 100V(1200w) / 200V , 230V(3000W) œNo need for air piping Cooling Adaptor Heating Coil Cooling time: 60 sec Heating time: 5 sec *Table is not included. Magnetic Induction Heating Device IH3200-N Cooling Device SRK-C3A Cooling Adapter Cooling Insert Holder Support œHolders in a variety of sizes from short to long can be heated. œRegardless of the material of holder, products from other companies can also be heated. (Nonmagnetic steel holders can also be heated.) œHeating and cooling work can be performed at the same time. œCutting tool with shank diameters of 3-32 can be attached and removed. It is possible to use for holder with short projection lengths by adopting a thin magnetic coil. Holder with short projection length (projection length 45mm) can be attached and removed by adopting the world's smallest thin magnetic coil (27mm). *Holder support extension table is required when a holder with less than projection length of 55mm is attached and removed. *Can only be used when a magnetic coil with an inside diameter of 20 or 28 is used. Comparison of projection lengths Projection length 45mm Standard products 23 53 IH1500

Holder support (option) Magnetic coil (option) An adapter for a cooling insert. *For SRK32A, please purchase a dedicated adapter separately. Cooling adapter (include) An insert for a cooling adapter. Cooling Insert (option) œCooling adapter (IH1500-CA) and heat-resistant glove (T6-8253-01J) are included.Please separately order the magnetic coil, cooling insert, holder support and holder support extension table. œPlease order FGB1-15A when replacing fuses. Connecting air hose(OD=6.0mm/ID=4.0mm) should be prepared. Air filters and lubricators should be used in case there is much moisture in the...

Magnetic coil (option) Holder support (option) When a holder with a length of less than 55mm is used, the magnetic coil does not reach. Please use a holder support extension table in such cases. Holder support for BT50 is required for a BT50 holder with projection length of less than 120mm. 6A 8A 10A 12A 16A 20A IH1500-SRS6A IH1500-SRS8A IH1500-SRS10A IH1500-SRS12A IH1500-SRS16A IH1500-SRS20A SRS SRE Coolant Insert (option) 30 BT HSK 40 50 25 32 40 50 63 100 IH1500-SPH Adaptable shank size Model -20 - - - - - - - SRS3A - SRS8A - - - - - - - - - - -28 -35 -42 -52 -70 Model SRS SRD SRE *Coil thickness...