Catalog excerpts
Power Hydro Chuck - PHC NEW! Hydro chuck with collet holder flexibility!
Open the catalog to page 1Power Hydro Chuck Tool pre-set without height offset NEW! Hydro chuck with collet holder flexibility! PHC has improved clamping pressure for high precision, stable clamping force with collet versatility. Power Hydro Chuck Length adjustment function Cutting tool height can be adjusted on the side with a hex wrench. (BT , CAT and SK shank) Ordinary Collet Holder Sold separetely Easy! Quick! Simple Clamping!! Simple one hand clamping operation with a hex wrench. Collet with stopper pin A variety of PHS collet sizes are available. Numerous ID sizes in 1/16" increments using PHS collet....
Open the catalog to page 2Insertion length Insertion length Length adjustment unit Hex wrench for length adjustment ●Please use a cutting tool with a tolerance of less than h7. A tolerance of less than 0/-001 is recommended for new cutting tools. ●Never operate the clamp bolt without cutting tool in the chuck. ●Hex-head screws are necessary to plug air hole for center through coolant feed. ●PHC12, 20, 0500 and 0750 have pin holes for collet with stopper pin on its body. Capable for PHS collet use. For longer projection length For shorter projection length Length adjustment unit Holder model Wrench Option Adjustable...
Open the catalog to page 3Insertion length Insertion length •Please use a cutting tool with a tolerance of less than h7 A tolerance of less than 0/-001 is recommended for new cutting tools •Do not leave the holder with actuating screw tightened when the chuck is empty •Hex-head screws are necessary to plug air hole for center through coolant feed •PHC12, 20, 0500 and 0750 have pin holes for collet with stopper pin on its body
Open the catalog to page 4Insertion length Insertion length •Please use a cutting tool with a tolerance of less than h7. A tolerance of less than 0/-001 is recommended for new cutting tools. •Do not leave the holder with actuating screw tightened when the chuck is empty. •PHC12, 20, 0500 and 0750 have pin holes for collet with stopper pin on its body. Length adjustment unit •Length adjustment unit can be used with BT, CAT and SK shank holders only. Ordering Example BT50-PHC10-105 with adjustment range of 40-45mm (Adjustable amount-5mm). Length adjustment unit Install / removal tool for length adjustment unit
Open the catalog to page 5Insertion length Insertion length •Please use a cutting tool with a tolerance of less than h7. A tolerance of less than 0/-001 is recommended for new cutting tools. •Do not leave the holder with actuating screw tightened when the chuck is empty. •PHC12, 20, 0500 and 0750 have pin holes for collet with stopper pin on its body. Shank size Name l.D. Projection length
Open the catalog to page 6Insertion length Shank size ●Please use a cutting tool with a tolerance of less than h7. A tolerance of less than 0/-001 is recommended for new cutting tools. ●Never operate the clamp bolt without cutting tool in the chuck. ●PHC12, 20, 0500 and 0750 have pin holes for collet with stopper pin on its body. Capable for PHS collet use. Wrench Option ●Please use a cutting tool with a tolerance of less than h7. A tolerance of less than 0/-001 is recommended for new cutting tools. ●Never operate the clamp bolt without cutting tool in the chuck. ●PHC12, 20, 0500 and 0750 have pin holes for collet...
Open the catalog to page 7Insertion length Insertion length Wrench (Option) • Please use a cutting tool with a tolerance of less than h7. A tolerance of less than 0/-001 is recommended for new cutting tools. • Do not leave the holder with actuating screw tightened when the chuck is empty. • PHC12, 20, 0500 and 0750 have pin holes for collet with stopper pin on its body. NBT-AHO is incompatible with BBT-AHO. AHO Shank size Name I.D. Projection length AHO Shank size Name I.D. Projection length
Open the catalog to page 8For cutter with oil hole /VTIMT USA CORPORATION www.nttoolusa.com 318 Seaboard Lane, Suite 301. Franklin, TN 37067 Tel.1-615-771-1899 Fax.1-615-771-0121 E-mail: sales@nttoolusa.com
Open the catalog to page 9All NT Tool catalogs and technical brochures
-
Power Hydro Chuck
13 Pages
-
Collet Type Floating Holder
2 Pages
-
BCL - BT Clamper
1 Pages
-
UTS series
36 Pages
-
HSK-T series
8 Pages
-
HSK serires
85 Pages
-
AHO series
42 Pages
-
CAT series
55 Pages
-
BT series
142 Pages
-
HSK Clamper
1 Pages
-
Slim Hydro Chuck PHC·S
8 Pages
-
General Catalog
586 Pages
-
OTP Optical Tool Presetter
6 Pages
-
"R"- ZERO HOLDER
9 Pages
-
ZERO MASTER / ZM-1
1 Pages
-
MORSE TAPER ADAPTERS / MTA
2 Pages
-
TAP HOLDERS / TP3B
2 Pages
-
EASY PRESET SERIES / STM
11 Pages
-
SHRINKFIT HOLDERS / SRE
8 Pages
-
ER COLLET CHUCKS / ERC
12 Pages
-
HDC COLLET CHUCKS / HDC-A
7 Pages
-
GDC COLLET CHUCKS / GDC
4 Pages
-
R-ZERO SETTER / SPZ-2
1 Pages
-
EASY PRESET SERIES / SDM
7 Pages
-
Straight Drill Chuck
7 Pages
-
HSK Tightening Fixture
2 Pages
-
Simple Setter
7 Pages
-
Side Lock Holders
8 Pages
-
Jacobs Taper Arbors
2 Pages
-
High Precision Coolant Collets
10 Pages
-
Chamfering Cutter Series
4 Pages
-
Quick Change Stub Tapper
4 Pages
-
Quick Change Stub Holder
5 Pages
-
Milling Chuck Collets
13 Pages
-
Contactless Tool Presetter
6 Pages
-
Coolant Inducer
4 Pages
-
Hyper Spindle
3 Pages
-
Angle Heads
7 Pages
-
Keyless Drill Chucks
2 Pages
-
Synchronous Tap Holder
11 Pages
-
Shrink-Fit Holders
8 Pages
-
Heating Device
3 Pages
-
R-Zero collet chucks
9 Pages
-
New Generation Milling Chucks
15 Pages