Data Sheets Permanent Magnetic Coolant Filtering System Type 235.180 Type 235.400 Type 235.620 Type 235.850 Type 235.1070 Type 235.1300 Type 236.180 Type 236.400 Type 236.620 Type 236.850 Type 236.1070 Type 236.1300 Download available on our homepage http://www.nsm-magnettechnik.com

Permanent Magnetic Coolant Filtering System Application • Design • Function Page 2 of 5 Application: The Permanent Magnetic Coolant Filtering System Type 235 and 236 are used in order to automatically clean contaminated coolants (emulsion, cutting oil) which arise at machines. Because of their construction with a magnetic drum in standard version (fine pole) or finest pole pitch version, they are particularly suitable for filtering emulsion, aqueous solutions, cutting- and grinding oil. The continuous cleaning of coolants brings about the following advantages: - improvement of the surface and...

Schematic Diagram Magnetic Field Line Comparison of magnetic drums: Standard version to the new finest pole pitch version Magnetic flux density in % standard version (fine pole pitch Feinpolteilung version) standard version finest pole pitch version Feinstpolteilung version fine pole ptich * standard version Expon. (Feinpolteilung) standard version # finest pole pitch version Expon. pole ptich version fine (Feinstpolteilung) Distance to the magnetic drum in mm opened gap adjustment plate Revision I [dimensions and technical modifications subject to change] closed gap adjustment plate standard...

Permanent Magnetic Coolant Filtering System measure table [mm] performance table rate of flow *1 (l/min) opened gap adjustment drive data the max. flow rate with emulsion approx. 110% with oil approx. 70% of the par value contamination approx. 2,5 g/l, grit size approx. 100 µm (deviant dimensions cause a lower capacity) 5% emulsion - 4mm² / s / 20°C oil - 20mm² / s / 20°C Revision I [dimensions and technical modifications subject to change] Type code: - gear motor magnetic drum pole pitch: - standard version (fine pole) - finest pole pitch version gear motor : - gear motor: make Bauer - SEW +...

Type 236.180 - 236.1300 Permanent Magnetic Coolant Filtering System with chain drive Page 5 of 5 472 312 infeed Fe-abrasion discharge * The measurements of the gear motor change, depending on the manufacturer of the gear motor * measurements on request measure table [mm] performance table rate of flow *1 (l/min) opened gap adjustment drive data the max. flow rate with emulsion approx. 110% with oil approx. 70% of the par value contamination approx. 2,5 g/l, grit size approx. 100 µm (deviant dimensions cause a lower capacity) 5% emulsion - 4mm² / s / 20°C oil - 20mm² / s / 20°C Revision I [dimensions...