*mydirectindustry

Datasheet GF398

Product catalog summary

Belt Conveyors Overview
This document provides technical specifications and configurations for NSM Magnettechnik's belt conveyors, specifically types 398.0 to 398.7. Each type is designed for different operational needs, with variations in height, motor type, and additional features.

Specifications

Types and Heights: Type 398 (30 mm), Type 397 (40 mm), Type 360 (60 mm), Type 380 (100 mm).
Motor Options: Drum motor and gear motor configurations are available, with specific power ratings and belt speeds.
Nominal Widths (NW): Ranges from 50 mm to 600 mm, with specific dimensions for each type.
Operating Voltage: Standard 230/400 V, 50 Hz, 3 Phase.

Procedures and Configurations

Electric Connections: Options for right (R) or left (L) connections.
Belt Speed: Standard speeds of 15 m/min and 30 m/min, with special configurations available.
Drive Arrangements: Various configurations for motor placement and drive direction.

Standards and Recommendations

Material Coatings: Rubber coating recommended for flat wire link belts and speeds over 60 m/min.
Lateral Guide Plates: Available for different nominal widths, with specific height adjustments.
Stripper and Belt Run Control: Options for inclusion or exclusion based on customer requirements.

Tables and Measurements

Detailed tables provide measurements for each type, including maximum and minimum lengths, and specific dimensions for components like shafts and plugs.

Critical Information

All dimensions and technical modifications are subject to change.
Customer-specific configurations are available upon request.

Catalog excerpts

Data Sheets Belt Conveyors Type 398 - height 30 mm Type 397 - height 40 mm Type 360 - height 60 mm Type 380 - height 100 mm Download available on our homepage http://www.nsm-magnettechnik.com

Open the catalog to page 1

Belt Conveyor with drum motor * Ø 123 with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min R - electric connection righ belt speed: v= 15 m/min (0,15 kW - 0,7A - 400V) v= 30 m/min (0,225 kW - 0,76A - 400V) v= special Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Electric connection- bend- and crash protectiont Belt quality - PVC coating - flat wire link belt (FDG) - special belt type Lateral guide plates - without - h = 100 mm - h = 50 mm - h = 30 mm - special design Belt...

Open the catalog to page 2

Belt Conveyor with gear motor * with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min C belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special Type code: Revision I [dimensions and technical modifications subject to change] Permanent magnetic Non magnetic Nominal width (NW)Length [ 50 mm steps ]Drive arrangement Belt quality - PVC coating - flat wire link belt (FDG) - special belt type Lateral guide plates Belt run control Belt speed Operating voltage Gear motor Frequ. contr. gear motor please specify Standard: 230/400 V - 50 Hz - 3 Ph...

Open the catalog to page 3

Belt Conveyor with gear motor 3 belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special Type code: Revision I [dimensions and technical modifications subject to change] Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Drive arrangement Gear motor Frequ. contr. Gear motor Lateral guide plates Operating voltage - PVC coating - flat wire link belt (FDG) - special belt type Belt speed Belt quality please specify Standard: 230/400 V - 50 Hz - 3 Ph

Open the catalog to page 4

Belt Conveyor with gear motor * with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Drive arrangement Belt quality - PVC coating - flat wire link belt (FDG) - special belt type Lateral guide plates - without - h = 100 mm - h = 50 mm - h = 30 mm - special design - without - including - without - including Gear motor Frequ. contr....

Open the catalog to page 5

Belt Conveyor without motor * with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min B - shaft on both sides Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Shaft arrangement 398.6 - 0100 - 0150 - acc. to table - acc. to table -L -R - B = both sides - without Belt quality - PVC coating - flat wire link belt (FDG) - special belt type Lateral guide plates - without - h = 100 mm - h = 50 mm - h = 30 mm - special design - without - including - without - including Gear motor Belt...

Open the catalog to page 6

Belt Conveyor with gear motor below * Please specify dimension L1 section A-B NW 7 belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ] Drive arrangement- Belt quality - PVC coating - flat wire link belt (FDG) - special belt type Lateral guide plates - without - h = 100 mm - h = 50 mm - h = 30 mm - special design - without - without - including Gear motor Frequ. contr. gear motor Stripper Belt run...

Open the catalog to page 7

Belt Conveyor Equipment Initiator for belt run control by costumer Initiator for belt run control by costumer Lateral guide plates for NW 50 and 1000 Lateral guide plates for NW 150 and wider Revision I [dimensions and technical modifications subject to change]

Open the catalog to page 8

Datasheet GF398

Datasheet GF398

Catalog excerpts

All NSM MAGNETTECHNIK GmbH catalogs and technical brochures