*mydirectindustry

Datasheet GF360

Product catalog summary

Belt Conveyors Overview
This document provides technical specifications and configurations for various types of belt conveyors, including models 360, 362, 363, 364, 366, and 367. Each type is designed for specific applications and comes with different motor and belt options.

Specifications

Type 360: Features a drum motor with belt speeds of 15 m/min and 30 m/min. It includes options for special belt types and coatings.
Type 362: Equipped with a gear motor, offering similar speed options and belt configurations as Type 360.
Type 363: Similar to Type 362 but with additional design variations and belt quality options.
Type 364: Includes a gear motor with customizable dimensions and belt speed options.
Type 366: A conveyor without a motor, designed for specific shaft arrangements and belt types.
Type 367: Features a gear motor below the conveyor, with customizable belt speeds and design options.

Technical Details

All models offer a range of nominal widths and lengths, adjustable in 50 mm steps.
Operating voltage is standardized at 230/400 V, 50 Hz, 3 Phase.
Belt quality options include flat wire link belts, high cut-resistant Keram, PVC, and knopped coatings.
Each model includes options for lateral guide plates and belt run control.

Installation and Safety
The installation of equipment complies with the EC Machinery Directive. Various support types and lateral guide plates are available for different nominal widths.

Conclusion
This document outlines the flexibility and customization available for NSM Magnettechnik's belt conveyors, catering to a wide range of industrial applications with specific technical requirements.

Catalog excerpts

Data Sheets Belt Conveyors Type 398 - height 30 mm Type 397 - height 40 mm Type 360 - height 60 mm Type 380 - height 100 mm Download available on our homepage http://www.nsm-magnettechnik.com

Open the catalog to page 1

Belt Conveyor with drum motor * Ø 123 with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min R - electric connection right belt speed: v= 15 m/min (0,15 kW - 0,7A - 400V) v= 30 m/min (0,225 kW - 0,76A - 400V) v= special Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Electric connectionDrum motor with Belt quality Lateral guide plates bend- and crash protectiont angle plug (hood and housing) Han 10E / HAN 6E - acc. to tabl L -R - bend protection - terminal box - angle plug...

Open the catalog to page 2

Belt Conveyor with gear motor with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min 280 * * differs, depending on type of motor section A-B C belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special Type code: Revision I [dimensions and technical modifications subject to change] Permanent magnetic Non magnetic Nominal width (NW)Length [ 50 mm steps ]Drive arrangement Gear motor Frequ. contr. gear motor Belt quality Lateral guide plates Belt run control Belt speed Operating voltage please specify Standard: 230/400 V - 50 Hz - 3 Ph

Open the catalog to page 3

Belt Conveyor with gear motor * with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special Type code: Revision I [dimensions and technical modifications subject to change] Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Drive arrangement Gear motor Frequ. contr. Gear motor Belt quality Lateral guide plates Belt run control Belt speed Operating voltage please specify Standard: 230/400 V - 50 Hz - 3 Ph

Open the catalog to page 4

Belt Conveyor with gear motor (E=L-130) retractable length slot nuts M10 x 15 belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special * with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min L - drive left lmin = 280mm lmax = 550mm Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Drive arrangement Gear motor Frequ. contr. gear motor Belt quality Lateral guide plates Belt run control Belt speed Operating voltage please specify Standard:...

Open the catalog to page 5

Belt Conveyor without motor * with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min (E=L-130) retractable length slot nuts M10 x 15 B - shaft on both sides Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ]Shaft arrangement Gear motor Belt quality Lateral guide plates Belt run control Belt speed 366 - 0100 - 0150 - acc. to table - acc. to table -L -R - B = both sides - without - knopped coating - PVC coating - PU-special belt - Keram (high cut resistant) - flat wire link belt...

Open the catalog to page 6

Belt Conveyor with gear motor below * Please specify dimension L1 L min.115 * with rubber coating when flat wire link belt (FDG) and/or v > 60 m/min belt speed: v= 15 m/min (0,25 kW - 0,68A - 400V) v= 30 m/min (0,25 kW - 0,68A - 400V) v= special Revision I [dimensions and technical modifications subject to change] Type code: Permanent magnetic Non magnetic Nominal width (NW) Length [ 50 mm steps ] Drive arrangementGear motor Frequ. contr. gear motor 367 - 0100 - 0150 - acc. to table - acc. to table - acc. to tabl L -R - P= 0,25 kW - P= 0,25 kW Belt quality - knopped coating - PVC coating - PU-special...

Open the catalog to page 7

Belt Conveyor Equipment Initiator for belt run control by costumer Lateral guide plates for NW 50 and 100 Initiator for belt run control by costumerl Lateral guide plates for NW 150 and wider NW - 40 Revision I [dimensions and technical modifications subject to change] sliding bend or magnetic roll

Open the catalog to page 8

Installation of Equipment acc. to EC Machinery Directive system free accessible Revision I [dimensions and technical modifications subject to change] system fully enclosed system partially enclosed

Open the catalog to page 9

Datasheet GF360

Datasheet GF360

Catalog excerpts

All NSM MAGNETTECHNIK GmbH catalogs and technical brochures