Group: NSK Group
Catalog excerpts
MOTION & CONTROL
Open the catalog to page 1MCM Series – Light weight type
Open the catalog to page 2[Body] Reference number : M C M 08 040 H 10 K 0 0 Monocarrier M type: MCM Series Nominal size (rail width, Unit: 10mm) Grease specification: O (standard AS2) Clean grease specification: B (LG2) Accuracy grade (H: High grade, P: Precision grade) Slider specification K: Single slider (See page C9) D: Double slider Ball screw lead (mm) [With Option part] Reference number : 40 E: With MCM option part Note : Optional components are available separately. Reference number code Specification Reference number 2 Proximity switch (a-contact 3pieces) MC - SRxx - 11 3 Proximity switch...
Open the catalog to page 3MCM Series - Light weight type Reference number Items not marked are available from standard stock. Monocarrier dynamic torque specification (N • cm) Basic load rating 1. Frictional resistance of NSK K1 is included in the dynamic torque in the table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. 4. Stroke limit = stroke + (4[margin]x2) Basic static moment load of linear guide
Open the catalog to page 4MCM03 Accuracy grade: Precision (P) Ball screw lead 1 and 2 Dimension of MCM03 (Single slider) A V is thickness of NSK K1 Reference number Items not marked are available from standard stock. Items marked with ★ are designated as "quick delivery item" upon request. Bolt hole pitch L3 on the items marked with & is 80 mm. Basic static moment load of linear guide Slider
Open the catalog to page 5MCM Series - Light weight type MCM03 Accuracy grade: High grade (H) Ball screw lead 10 and 12 Dimension of MCM03 (Single slider) A V is thickness of NSK K1
Open the catalog to page 6Accuracy grade: High grade (H) Dimension of MCM05 (Single slider) Ay is thickness of NSK K1 Reference number Items not marked are available from standard stock. Items marked with ★ are designated as "quick delivery item" upon request. Basic static moment load of linear guide Slider
Open the catalog to page 7Dimension of MCM05 (Double slider) Av is thickness of NSK K1 Reference number Items not marked are available from standard stock. Items marked with ★ are designated as "quick delivery item" upon request.
Open the catalog to page 8Accuracy grade: High grade (H) Dimension of MCM06 (Single slider) AV is thickness of NSK K1 Reference number Dimension G is 45 for those marked with Items not marked are available from standard stock. Items marked with ★ are designated as "quick delivery item" upon request. Basic static moment load of linear guide Slider
Open the catalog to page 9MCM Series - Lilght weight type Accuracy grade: High grade (H) Dimension of MCM06 (Double slider) AV is thickness of NSK K1
Open the catalog to page 10Accuracy grade: High grade (H) Dimension of MCM08 (Single slider) AV is thickness of NSK K1 Reference number Dimension G is 60 for those marked with & . Items not marked are available from standard stock. Items marked with ★ are designated as "quick delivery item" upon request. Basic static moment load of linear guide Slider
Open the catalog to page 11MCM Series - Light weight type Accuracy grade: High grade (H) Dimension of MCM08 (Double slider) AV is thickness of NSK K1
Open the catalog to page 12Accuracy grade: High grade (H) Dimension of MCM10 (Single slider) ZlV is thickness of NSK K1 Reference number Dimension G is 90 for those marked with Items not marked are available from standard stock. Items marked with ★ are designated as "quick delivery item" upon request. Basic static moment load of linear guide Slider
Open the catalog to page 13Dimension of MCM10 (Double slider) AV is thickness of NSK K1 Reference number Dimension G is 90 for those marked with Items not marked are available from standard stock. Dimension (1) is 150mm for those marked with •. Items marked with ★ are designated as "quick delivery item" upon request.
Open the catalog to page 143 Cover unit (optional) Monocarrier body 1 Sensor unit (optional) 2 Sensor rail (optional) 4 Motor mounting bracket (optional) Optional components for MCM10 (example) 1 Sensor unit : Sensors, sensor mounting parts and a sensor dog are available in a set. When you used a sensor unit, the full cover unit cannot be used. 2 Sensor rail : Rail for sensor mounting is available. 3 Cover unit : Top cover or full cover (included top cover and side cover) is available. 4 Motor bracket for motor mounting : Prepared for each motor maker. , We assemble optional components upon request.
Open the catalog to page 15MCM Series Light weight type You require an optional spacer plate when you use a cover unit or a sensor unit for an MCM03 with the lead of 1 or 2 mm. (Refer to page C39.)
Open the catalog to page 16Sensor rail for MCM02: MC-SRL2- **** Sensor rail for MCM06: MC-SRL6- **** Sensor rail for MCM08: MC-SRL8- **** Sensor rail for MCM10: MC-SRL1- **** is the same as rail dimension L2 Please place and assemble the seat during the attachment between the sensor rail and the support unit attaching part for MCM03 and MCM06.
Open the catalog to page 17MCM Series Light weight type Nominal size
Open the catalog to page 18Nominal size
Open the catalog to page 19MCM Series Light weight type Height of screw head is not included. Optional spacer (MC-SP03-00) is required for a main unit with ball screw lead of 1 and 2 mm. *The full-cover unit cannot be used when the sensor unit is used. Height of screw head is not included. Spacer for MCM03 (Optional) MC-SP03-00 (for ball screw lead 1 and 2 mm)
Open the catalog to page 20Section X-XTop cover Unit ♦ (Unit: mm) Not include height such as screw The dimensions of cover shown abore do not include the head height of fixing machine screws. Add the head of machine screws of approximately 2.5 mm to the outer measurement of a cover unit. Set a margin for mechanical interference with surrounding components. *When you use a sensor unit, the full-cover unit cannot be used.
Open the catalog to page 21MCM Series Light weight type Motor bracket (A£) Black anodized aluminum Da p Hexagon socket head cap screw (M3x0.5, length 10) Note: Be sure to align the centerlines when installing the motor.
Open the catalog to page 22Un=> ^ Hexagon socket head cap screw (M4, length 12) q Hexagon socket head cap screw (M3, length 10) Motor Bracket for MCM03
Open the catalog to page 23MCM Series Light weight type
Open the catalog to page 24All NSK Europe Ltd. catalogs and technical brochures
-
Ball Screws - BSS Series
1 Pages
-
Creep-Free Bearings Series
1 Pages
-
BNEQARTET Bearings
1 Pages
-
Agri Disc Hub
1 Pages
-
TF Series Bearings
1 Pages
-
Agri Disc Hub
1 Pages
-
HMS series
1 Pages
-
ROBOT MODULE™ MR SERIES
44 Pages
-
Disc Harrow Bearings
2 Pages
-
ROLLING BEARINGS
707 Pages
-
TECHNICAL INSIGHT
2 Pages
-
Hub unit bearings
23 Pages
-
CONDITION MONITORING
6 Pages
-
BEARING MOUNTING TOOLS
28 Pages
-
Automotive Products
48 Pages
-
NSK IN EUROPE
6 Pages
-
Linear Guides Standard Items
62 Pages
-
Bearings for the Steel Industry
44 Pages
-
Bearing Replacement Guide
264 Pages
-
ROLLING BEARINGS
283 Pages
-
Bearings for the Cement Industry
20 Pages
-
Authorised Distributor
7 Pages
-
Added Value Training
12 Pages
-
Handling Instructions
48 Pages
-
Pocket Guide Linear Motion
44 Pages
-
Molded Oil™- Bearings
9 Pages
-
Plummer Blocks
52 Pages
-
Double Row Ball Bearing
44 Pages
-
Corporate Precision Components
24 Pages
-
Bearing Doctor
44 Pages
-
Self-Lube Hand book
160 Pages
-
Guide to RHP Self-Lube
12 Pages
-
Deep Groove Ball Bearings
12 Pages
-
Corporate Brochure
24 Pages
-
Bearings for Quarry and Mining
20 Pages
Archived catalogs
-
Troubleshooting poster
1 Pages
-
Super Precision Bearings
120 Pages
-
Ball Screw Support Bearings
44 Pages
-
Asset improvement programme
6 Pages
-
Bearings for Pumps & Compressors
24 Pages