KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS —Solid state sensing technology – laser tracking engine —Z-axis control wheel for scroll/zoom capability —Removable Ball —38mm or 50 mm ball —Output: PS/2 & USB or Quadrature —Smooth operation in rugged environments —Various top plate configurations available —Custom connector options available —Various ball colours 3-AXIS OEM TRACKBALLMODULES Utilizing the latest and most advanced laser optical tracking technology, the Z- Series laser optical Trackerballs™ are extremely high specification, contact-less devices, ideal for the most demanding of cursor control applications. The device provides both conventional X and Y-axis cursor movement with an additional Z-axis control wheel surrounding the ball. The laser tracking engine provides accurate cursor motion at all speeds and on virtually any ball, combining the benefits of solid state sensing (no moving parts except the ball). The unit has been designed to be back of panel mounted as part of OEM keyboards and consoles. GENERAL TECHNICAL SPECIFICATIONS Mechanical Weight Ball Tracking Force Z-xis wheel tracking force Ball Load Resolvable Ball Speed Resolvable Z-axis wheel speed Mounting Position Tracking engine Housing Material Z-axis wheel material/finish Electrical Supply voltage Supply current Resolution 200 grams (Z38) / 350 gr (Z50) Epoxy Resin, 38 mm 20 grams Nominal - damper ring / 30 - 80 grams - dust seal PTFE or silicone rubber 5 - 15 grams 100N max. downward pressure (10 Kg) for 2 mins. 40 Inches/sec. 1 revolution per second All angles Laser Navigation Technology (solid state sensing) PC/ABS - black PC/ABS with soft touch coating - black Resolution - Z-axis wheel Output connector Mating output connector Switch connector Mating switch connector Switch Inputs (USB, PS/2) Laser safety class 4.4V to 5.25V D.C. 28mA typical, 35mA maximum 900 counts (Z38) / 1250 counts (Z50) per ball revolution @ 1 IPS (inches per second) +/- 10% 1800 counts (Z38) / 2500 counts (Z50) counts per ball revolution @ 5 IPS (inches per second) +/- 10% 200 counts (Z38) / 300 counts (Z50) per revoloution 10 Way JST, vertical header, part no. B10B-PH-SM4-TB 10 Way JST connector, part no. PH, CR or KR types (e.g. PHR-10) 4 Way JST, vertical header, part no B4B-PH-SM4-TB 4 Way JST connector, part no: PH, CR or KR types (e.g. PHR-4) 3 switches: left, middle, and right. Embedded class 1M laser safety, IEC 60825-1 Environmental Operating temperature Storage temperature Operating humidity Storage humidity Vibration Operating Shock Mechanical lifetime MTBF ESD EMC 0°C to +55°C (IEC 60068-2-1, IEC60068-2-2) -40°C to +85°C (IEC 60068-2-1, IEC60068-2-2) 93% RH @ 40°C, non-condensing (IEC 60068-2-78) 10%-95% non-condensing (IEC 60068-2-78) 2g, 10-500Hz, 1 octave/min, 10 sweep cycles (IEC 60068-2-6) 15g/11ms, ½ sine, 3 shocks in +ve and -ve direction, all 3 axes (IEC 60068-2-27) 1 million ball revolutions in excess of 80,000 hours (MIL-STD-217F) 15kV air-discharge and 8kV contact discharge (IEC 61000-4-2) Radiated immunity - limits according to level 3 of IEC 61000-4-3. Radiated emissions to EN55022 class B

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS Z-range DIMENSIONAL DRAWING 38 mm trackball Dimensional drawing specifies factory default orientation. All dimensions are in mm unless otherwise stated. Tolerances +/- 0.2mm unless otherwise stated The company reserves the right to alter without prior knowledge the specification or design of any standard product or service. NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.com • IS

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS Z-range DIMENSIONAL DRAWING 50 mm trackball Dimensional drawing specifies factory default orientation. All dimensions are in mm unless otherwise stated. Tolerances +/- 0.2mm unless otherwise stated The company reserves the right to alter without prior knowledge the specification or design of any standard product or service. NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.com • IS

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS Z-AXIS CONTROL WHEEL The Z- laser trackball provides conventional X and Y axis cursor movement with an additional Z-axis control wheel surrounding the ball. The Z-axis control wheel provides scroll/zoom capabilities for more effective navigation in complex user interfaces and operating systems (please note the function of the control wheel is software dependent). The control wheel incorporates a high quality roller bearing providing smooth and reliable motion throughout the trackball lifetime. The trackball also features a removable retention...

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS CONNECTION DETAILS PS/2 - USB OUTPUT Output Connector : P1 Description: 10 way, 2mm pitch, vertical connector Manufacturer: JST (or equivalent) Part No: B10B-PH-SM4-TB Mating connector: PH, CR or KR types Pin Number Do not connect Earth Do not connect + 5V D.C PS/2 Data, DPS/2 Clock, D+ 0V Switch Input Connector : P2 Description: 4 way, 2mm pitch, vertical connector Manufacturer: JST (or equivalent) Part No: B4B-PH-SM4-TB Mating connector: PH, CR or KR types Function Left switch Middle switch Right switch 0V Switch Schematic Left Middle...

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS CONFIGURATION The Z - Series trackball provides features that may be selected using the DIP switch located on the printed circuit board. Here the assigned function of each switch DIP Switch Functions quadrature Trackballs DIP Switch Orientation 1 Setting Orientation 2 Setting Scroll Orientation Factory setting Tracking Mode Factory setting Factory default setting: All DIP switches OFF Orientation The orientation function allows the user to mount the Z- trackball device in one of four positions (see figure. 1 below). The orientation of the...