TCL50F1
5Pages

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS TRACKBALL UNITS TCL50F1 - TCS50F4 50 MM “CHAMELEON“BACKLIT TRACKBALL Backlighting in up to 7 different colours, IP65 sealed CHAMELEON These “Chameleon“ backlit trackballs feature 7-colour illumination of the total ball surface and the mouse button legends. Up to seven different colours can be selected by internal settings on the trackball or by remote dynamic selection via an output connector. For both selection methods, internal or remote, the illumination intensity can be dimmed. The total panel mount unit is sealed to IP65 static and comes with a silicon sponge to seal the carrier plate into the users' cabinet or console. The output is combo PS/2 & USB with autorecognition and in both cases the current for the illumination is drained from the mouse ports. Two basic versions are available : Black overlay version - Type TCL50F1 With aluminium carrier plate, two short travel switches and dark coloured polyester overlay. Tactile, short travel switches Stainless steel version - Type TCS50F4 With stainless steel carrier plate and two long travel stainless steel switches. Tactile switches GENERAL TECHNICAL SPECIFICATIONS Sealing : IP65 static Ball diameter : 50,8 mm (2'') Ball material : epoxy resin, translucent Dimensions : 100 x 116 x 40 mm Weight : 0,6 kg Lifetime : >= 2 million ball revolutions Tracking force : nom. 50 grams Output : PS/2 & USB Combo Cable : 1 shielded, straight 1,6 m long Operating temperature range: -10°C to +60°C Storage temperature range : -25°C to +80°C Switches Main features : full backlighting of ball and switches in up to 7 different colours colours selectable internally (fixed) or remote (dynamic) illumination intensity can be dimmed internally or remotely illumination power directly from mouse port, no extra power supply proven industrial grade 50mm large trackball ORDER INFO Polyester carrier Travel : 0,3 mm Operating force : 2,55 N Mechanical life : 1 million oper. CE Compliant to EMC Directive 89/336/EEC for Electromagnetic Compatibility. Low Voltage Directive 73/23/EEC not applicable for our trackballs. CONNECTIVITY These combo PS/2 & USB trackball units have a 1,6 meter long shielded straight cable ended by a USB type A plug. An adaptor to PS/2 is added. No special device driver is needed, use standard available drivers of your operating system. Stainless steel carrier Due to the increasing differences of the PS/2 mouse port specifications of the various PC manufacturers, we do recommend that this unit should be tested on the final PC configuration and operating system prior to installing it in series. Combo PS/2 & USB output Standard factory setting : blue baclit. VER. 1.1 NSI bvba • Haakstraat 1A • 3740 Bilzen, Belgium

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS TRACKBALL UNITS TCL50F1 - TCS50F4 50 MM “CHAMELEON“BACKLIT TRACKBALL Backlighting in up to 7 different colours, IP65 sealed DIMENSIONAL DRAWING TCS50F4 (TCL50F1 has the same outside dimensions and mounting stud details) The company reserves the right to alter without prior knowledge the specification or design of any standard product or service. NSI bvba • Haakstraat 1A • 3740 Bilzen, Belgium

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS TRACKBALL UNITS different colours, 1. Electrical Specification Protocol Table 1: Basic Electrical Specification Table 3: Control Connections Notes: 4. If external colour control is required, switches 4, 5 and 6 on SW2 must be set to the OFF position. See section 3.1 for details. 5. Colour control connections are not PWM or SSDM compatible. These connections can only be switched up to 50Hz. 6. Colour control lines can be connected to a TTL/CMOS compatible driver, open-collector/open-drain driver or external switches to 0V. Pins are...

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS TRACKBALL UNITS different colours, 2.2 LED Output Connector: CN4 This connection allows for external LEDs to be attached and controlled by the on-board LED controller. The LEDs must be of common anode type. No resistors are provided for current limiting on the cathode channels, these must accompany the external LEDs. Description: 4 way, 2mm pitch, right-angled connector Manufacturer: JST (or equivalent) Part No: S4B-PH-SM3-TB Mating connector: PH, CR or KR types Table 6 Colour Control Switch Function Notes: 11. If external colour...

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS TRACKBALL UNITS different colours, 3.2 Demo Feature The demo feature allows the trackball to scroll through a sequence of colours by varying the individual LED channels. The feature includes the ability to configure the peak intensity and the scrolling speed, this is configurable only by using the SW2 DIP switch pack. The demo feature is enabled by setting switch 8 on SW2 to the ON position, when enabled the following DIP switch functions apply:- Table 8: Scrolling speed configurations for demo feature.