• Industrial grade Utilizing the latest and most advanced infra-red optical tracking technology, the L38 Series Trackerball™ is an extremely high specification, contact-less device, ideal for the most demanding of cursor control applications. The infra-red optical tracking engine provides accurate cursor motion at all speeds and on virtually any ball, combining the benefits of solid state sensing (no moving parts except the ball). The L38 trackballs are available with a variety of electrical outputs, tracking force options, and sealing capabilities up to IP68. The solid state design allows the device to be subjected to extreme conditions and provides the user with the ability to wash down, decontaminate, and sterilise, making it the ideal trackball for a wide range of demanding applications and environments. The unit has been designed to be back of panel mounted as part of OEM keyboards and consoles. CONNECTIVITY & CUSTOMIZABILITY • Custom connector options possible - Free running ball minimal ball tracking force - Removable ball - Fixed friction/scraper ring: slightly increased ball tracking force MAIN FEATURES • Solid state sensing technology-infra-red tracking engine • Smooth operation in rugged environments • Self draining and back flushing features • Vx3™ integrated zoom feature for scroll wheel functionality • Self draining and back flushing features The company reserves the riqht to alter without prior knowiedqe the specification or desiqn of any standard product or service.

L38 GENERAL TECHNICAL SPECIFICATIONS Mechanical Weight Housing Material Tracking engine Mounting Position Sealing gasket Sealing to Ball diameter Ball material Ball Load Ball Rotation Resolvable Ball Speed Available tracking forces Infra-red Optical Navigation Technology (solid state sensing) All angles Cellular silicone IP 68 (BS EN 60529) 1 million ball revolutions 200N Maximum downward pressure (20 Kg) for 2 minutes Continuous and reversible any direction 40 Inches/sec. 5 grams Nominal Free Running 20 grams Nominal Friction / Scraper Ring 30 - 80 grams Nominal / Removable Ball, plastic ring...

L38 CONNECTION DETAILS QUADRATURE OUTPUT Output Connector: PI Description: 10 way, 2mm pitch, right-angled connector Manufacturer: JST (or equivalent) Mating connector: PH, CR or KR types The company reserves the right to alter without prior knowledge the specification or design of any standard product or service._

L38 CONFIGURATION The L38 trackball provides features that may be selected using the DIP switch located on the printed circuit board. This table details the assigned function of each switch. DIP switch functions quadrature trackballs The company reserves the riqht to alter without prior knowledqe the specification ordesiqn of any standard product or service.

VX3 is patent protected facility that provides the same 2 modes of functionality as a scroll wheel on a 3-axis mouse. Operation: Press middle button once to latch scroll mode one (e.g. dynamic pan feature); Press middle button again to latch scroll mode two (e.g. 3rd axis zoom feature); Further middle button presses toggles between scroll mode one and scroll mode two; Press either left or right buttons to cancel feature and resume normal X-Y cursor operation Smart Switch A patent protected button latch facility. Press right button for 3 seconds or more to enable; Once enabled, pressing any button...

L38 DIMENSIONAL DRAWINGDimensions for free running and fixed friction/scraper devices 75.50 32.85 All dimensions are in mm unless otherwise stated. Tolerances +/- 0.2mm unless otherwise stated Please note that an IGES model is available on request. The company reserves the riaht to alter without prior knowledae the specification or desian of any standard product or servic€

L38 DIMENSIONAL DRAWING Dimensions for removable ball device with plastic ring All dimensions are in mm unless otherwise stated. Tolerances +/- 0.2mm unless otherwise stated Please note that an IGES model is available on request. p 7 / 8 The company reserves the right to alter without prior knowledge the specification or design of any standard product or service._

Dimensions for removable ball device with alu ring All dimensions are in mm unless otherwise stated. Tolerances +/- 0.2mm unless otherwise stated Please note that an IGES model is available on request. p 8 / 8 The company reserves the right to alter without prior knowledge the specification or design of any standard product or sen/ice._