KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS 75 MM OEM TRACKBALLMODULE The GK75 is a very high specification, back of panel mounted trackball with large 75 mm ball diameter. It is constructed from PPS and benefits from its large diameter shafts and bearings for smooth running. It is designed to be rear-panel mounted as part of OEM systems, where reliability, robustness and an extensive life span are essential. The large ball provides the perfect solution for high performance, high resolution applications. GENERAL TECHNICAL SPECIFICATIONS Sealing Casing material Top plate material Ball material Ball colour Ball diameter Weight Shaft diameter Tracking force Mounting angle Lifetime - Ball revolutions Storage temperature Operating temperature Relative humidity Vibration The GK75-1502 is PS/2 compatible. The GK75-1602 can be plugged into any USB port or hub. Both types are supplied with 1,6m long shielded straight cables and external switch cables. No device driver is supplied with the unit. Please use standard available drivers in your operating system. : none, IP40 : PPS polypropylene-disulphide : PPS polypropylene-disulphide : Phenolic resin : Yellow or black : 76,2 mm : 650 grams : 9,5 mm : 15 grams nominal : Max. 30° to horizontal plane : > 2 million : -20°C to +80°C :-10°C to +60°C : 95% non-condensing : 5G, 5-2KHz any plane * Due to the increasing differences of the PS/2 mouse port specifications of the various PC manufacturers, we do recommend that this unit should be tested on the final PC configuration and operating system prior to installing it in series. ORDER INFO OUTPUT BALL COLOUR ORDER NUMBER Yellow ball Black ball P75-160244 : Trackball module only, yellow ball OR P75-160240 : Trackball module only, black ball OC6010160 : 1,6 m shielded cable with 6 pin mini DIN plug IC040035 : 35 cm switch cable (4 wires) to CON2 Yellow ball Black ball P75-160244 : Trackball module only, yellow ball OR P75-160240 : Trackball module only, black ball OC5010160 : 1,6 m shielded cable with USB type A plug IC040035 : 35 cm switch cable (4 wires) to CON2 NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.com

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS Dip switches : leave off, for factory use only. 10 way connector (CON1) Connector 2 Switch input Left switch Middle switch Right switch Connector type : JST PH Series 2,0mm pitch. Mating connector : JST KR Series 2,0mm pitch. Left Middle Right Connector type CON1, CON2 : JST PH Series 2,0mm pitch. Mating part to connector CON1, CON2: JST KR Series 2,0mm pitch. Type numbers: 04KR-8M (CON2), 10KR-8M(CON1) The company reserves the right to alter without prior knowledge the specification or design of any standard product or service. NSI bv...