KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS 38 MM OEM TRACKBALLMODULE The GK38 series are ruggedised professional trackballs for harsh industrial environments. The double-sided seal ring provides a sealing to IP65 static (ball in rest). Stainless steel shafts and bearings ensure a solid and precise pointer control. The unit can be used for frontpanel mounting (remove the mounting bracket) or for backpanel mounting. GENERAL TECHNICAL SPECIFICATIONS Sealing Casing material Ball material Ball colour Ball diameter Weight Seal material Shaft diameter Tracking force Mounting angle Lifetime - Ball revolutions Supply voltage (GK38-4002) Supply current (GK38-4002) Storage temperature Operating temperature Relative humidity Vibration The GK38-4502 is PS/2 compatible. The GK38-4602 can be plugged into any USB port or hub. Both types are supplied with 1,6m long shielded straight cables and external switch cables. : IP65 (static) : ABS / Polycarbonate : Phenolic resin : Black : 38,1 mm : 100 grams : PTFE : 3 mm : 50 grams nominal : Max. 90° to horizontal plane : > 2 million : 5 Vdc +/- 5% : 10 mA typ : -25°C to +80°C :-10°C to +60°C : 95% non-condensing : 5G, 5-2KHz any plane The GK38-4002 has phase quadrature output: X1(Y1) leads X2(Y2) when motion of ball in positive X(Y) direction. No device driver is supplied with the unit. Please use standard available drivers in your operating system. It is supplied with a 10-way connection cable of 35 cm. * Due to the increasing differences of the mouse port specifications of the various PC manufacturers, we do recommend that this unit should be tested on the final PC configuration and operating system prior to installing it in series. OPTIONAL ANTI-VANDAL BACKPLATE This additional backplate and mounting spacers enable the unit to absorb a very high level of abuse or impacts. When mounted properly by the end-user, this backplate will limit the hostile impacts on the ball to an acceptable level and protect shafts, bearings and other components of the unit. ORDER INFO OUTPUT ORDER NUMBER P38-500420 Trackball module only IC101035 : 35 cm interconnection cable to CON 1 P38-560420 : Trackball module only OC6010160 : 1,6 m shielded PS/2 cable with 6 pin mini DIN plug IC040035 : 35 cm switch cable (4 wires) to CON2 P38-560420 : Trackball module only OC5010160 : 1,6 m shielded cable with USB type A plug IC040035 : 35 cm switch cable (4 wires) to CON2 Anti-Vandal Backplate Incl, spacers, washers and screws NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.com

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS DIMENSIONAL DRAWING Dip switches : leave off, for factory use only. Connector type : JST PH Series 2,0mm pitch. Mating connector : JST KR Series 2,0mm pitch. Mounting holes Diam. 3,5 (6x) Switch input Left Switch Middle Switch Right Switch Connector type : JST PH Series 2,0mm pitch. Mating connector : JST KR Series 2,0mm pitch. Left Middle Right The company reserves the right to alter without prior knowledge the specification or design of any standard product or service. NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90...