KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS Ÿ16 mm ball Ÿno sealing Ÿvery compact The GK16-1502 is a high specification keyboard or panel mounted trackball. This trackball features ABS construction, has a phenolic ball with metal core, quality shafts and bearings to ensure precision movement. The topring / ball is removable. A removal tool is part of the supply. Compact dimensions and back of panel mounting make the GK16 ideal for compact keyboard, mobile or remote control applications. GENERAL TECHNICAL SPECIFICATIONS Sealing Casing material Top plate material Ball material Ball colour Ball diameter Weight Shaft diameter Tracking force Resolution Mounting angle Lifetime - Ball revolutions Storage temperature Operating temperature Relative humidity Vibration The trackball is PS/2 or USB compatible and is supplied with an interconnection PCB and all relevant cables. No special device driver is required. : none, IP40 : ABS : ABS : Phenolic resin (metal core) : Black : 16 mm : 20 grams : 3 mm : 10 grams nominal : 117 pulses per ball revolution : Max. 30° to horizontal plane : > 1 million : -20°C to +70°C : 0°C to +60°C : 95% non-condensing : 5G, 5-2KHz any plane * Due to the increasing differences of the mouse port specifications of the various PC manufacturers, we do recommend that this unit should be tested on the final PC configuration and operating system prior to installing it in series ORDER INFO & PARTS DESCRIPTION External switch Left switch Middle switch Right switch GND sw.middle in GND sw. left in sw right in CLK DATA Vcc Left Middle Right ORDER NUMBER Trackballmodule only, combo USB & PS/2 output, auto-select Flexlead interconnection cable (2) Interconnection PCB (3) Shielded cable 1,6 m. long with PS/2 plug (4) OR Shielded cable 1,6 m. long with USB plug (4) Cable (4 wires), 35 cm long to connect up to 3 external switches (5) NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.co

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS DIMENSIONAL DRAWING The company reserves the right to alter without prior knowledge the specification or design of any standard product or service. NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.com • IS