KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS GS50 •50 mm steel ball •IP54 sealing 50 MM STEEL OEM TRACKBALLMODULE The GS50 series are ruggedised professional trackballs. The ball and the trim are made of quality stainless steel giving the unit a stylish all metal look. The double-sided seal ring provides a sealing to IP54. Stainless steel shafts and bearings ensure a solid and precise pointer control. GENERAL TECHNICAL SPECIFICATIONS The GS50-4502 is PS/2 compatible. The GS50-4602 can be plugged into any USB port or hub. Both types are supplied with 1,6m long shielded straight cables and external switch cables. The GS50-4002 has phase quadrature output: X1(Y1) leads X2(Y2) when motion of ball in positive X(Y) direction. No device driver is supplied with the unit. Please use standard available drivers in your operating system. It is supplied with a 10-way connection cable of 35 cm. * Due to the increasing differences of the mouse port specifications of the various PC manufacturers, we do recommend that this unit should be tested on the final PC configuration and operating system prior to installing it in series. Casing material Ball & trim material Ball diameter Seal material Shaft diameter Tracking force Mounting angle Lifetime - Ball revolutions Supply voltage (quadrature) Supply current (quadrature) Storage temperature Operating temperature Relative humidity ABS/Polycarbonate Stainless steel 50,8 mm 700 grams PTFE composite 9,5 mm ORDER INFO OUTPUT ORDER NUMBER Consisting of : Quadrature GS50-4002 P50-50028C Trackball module only PS/2 GS50-4502 P50-56028C : Trackball module only OC6010160 : 1,6 m shielded PS/2 cable with 6 pin mini DIN plug IC040035 : 35 cm switch cable (4 wires) to CON2 USB GS50-4602 P50-56028C : Trackball module only OC5010160 : 1,6 m shielded cable with USB type A plug IC040035 : 35 cm switch cable (4 wires) to CON2 NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.com • ISO 9001

KEYBOARDS & POINTING DEVICES FOR THE MOST DEMANDING JOBS GS50 DIMENSIONAL DRAWING Dip switches : leave off, for factory use only. Connector type : JST PH Series 2,0mm pitch. Mating connector : JST KR Series 2,0mm pitch. The company reserves the right to alter without prior knowledge the specification or design of any standard product or service. VER. 2.0 NSI bv • Kapittelstraat 18 • 3740 Bilzen • Belgium • +32 89 51 90 00 • [email protected] • www.nsi-be.com • ISO 9001