Catalogs >
NSGate >
Basic kits of electrical Enclosures

Basic kits of electrical Enclosures
2Pages

Catalog excerpts

Outdoor Video Surveillance systems Basic kits of electrical Enclosures NSGate electrical enclosures are designed to install outdoor video surveillance systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a complete product for installation and operation in any climate. Depending on the field of application and operating conditions, various series of electrical enclosures with protection category IP66 / NEMA4 are used: NSB-xxyy Powder-coated sheet Steel NSE-xxyy Coated Aluminum alloy (ATEX compliant) NSP-xxyy Glass Reinforced Polyester The NSBox assembled in an NSE-xx enclosure can be used for outdoor/indoor installations in hazardous areas. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables. These modules can also be included in the assembly: • Climate: thermostats, Fan Heater, Thermoelectric cooler/ assembly; • Fibre-optic distribution frame (ODF) with LC/SC/FC adapters, pigtails, patch cords; • Mechanical accessories: pole mounting kit, Rain hood, Door lock, etc. The name of each model and product code contain relevant information for this electrical enclosure ranging from the dimensions, and preset subsystems. NSB | NSP-xxyy H1 H2 H3 F1 F2 F3 F4 C2 C4: NSB-xxyy : 3030 : 3040 : 3838 : 4040 : 3860 : 6060 : NSP-xxyy : 3040 : 4040 : 4060 : 8 preset subsystems H1 : Fan Heater H2 : Thermal insulation H3 : Fan Heater and Thermal insulation F1 : ODF with 4x FC adapters F2 : ODF with 8x FC adapters F3 : ODF with 12x SC adapters F4 : ODF with 16x LC adapters preset subsystems C2 : Thermoelectric assembly TC-100-AC C4 : Thermoelectric assembly FR-208

Open the catalog to page 1

All NSGate electrical enclosures of any series have preset kits of options (Sets): [1,2, 3, 4, 5], where the digits denote the subsystems installed inside the enclosure during assembling: [1] BASIC: DIN rails, cable glands, circuit breaker, terminal blocks; Fan with thermostat. [2] HEATER: Fan Heater 75W with thermostats. [3] FIBER: ODF with 4 FC, 8 FC or 16 LC adapters, pigtails, patch cords. [4] IZOLUX: Thermal insulation of foamed polyethylene. [5] COOLER: Thermoelectric assembly; C2= TC-100-AC, C4= FR-208-AC. Basic kits of NSB-xxyy | Sheet steel Enclosure | IP66 Cabinet 300x300x210, set...

Open the catalog to page 2