Specification Sheet : The SmartPump™ is a positive pressure pump with a patented high-precision computer actuated valve coupled with a patented precision nozzle. SmartPump™ technology was developed to produce flow rates that can be more precisely controlled than any other high-speed dispensing pump of its kind featuring discrete volumetric control down to 100 picoliters. By maintaining constant material pressure and running a customizable computer-controlled valve open and close routine, the SmartPump™ can generate precise starts and stops, maintain a consistent material flow rate, and handle an extreme range of material viscosities. Size: H 219.4 x W 19.8 x D 31.5mm (H 8.64 x W 0.78 x D 1.24 in) Weight: 0.50 kg (1.0 lb) Material Inlet: Leur lock, 10-32 Features:  Tight volumetric control as low as 100 pl respectively  Reduced line widths (as small as 20µm)  Broad material compatibility, including highviscosity materials  Precise starts and stops with no material tailing  Customizable actuation routines per material Air pressure: 0-1000 kPa (0-150 psi) Valve resolution: 0.1 µm Variations:  Leur lock valve set for needle dispensing  Heated SmartPump™ 100 Dead volume: 0.2315 ml Viscosity range: 0.001-1000 Pa·s (1-1,000,000 cps) Wetted parts materials: 316/316L, Viton, Fluoroelastomer, Buna N, Polypropylene, Zirconia, Alumina, Titanium Nitride, Tungsten carbide. (Depending on material being dispensed and compatibilities) Standard ceramic nTip size chart (Contact us for larger or custom sizes) nTip Part# 50 µm wide conductive lines with high aspect ratio www.nscrypt.com nScrypt Inc., 12151 Research Parkway, Suite 150, Orlando, FL 32826