Specification Sheet : The nFD™ device is driven by a high-precision computer controlled system that allows the user to precisely place materials in a specified XYZ location. The size of the nFD™ was also designed with the approach that size matters and therefore this device has an intentionally narrow profile to allow multiple devices to be utilized on a single hardware platform. The nFD™ was designed to print thermoplastics utilizing a flexible approach that allows the user to choose pen tip shapes and sizes. The interchangeable nozzles, nTips™, allow users to print parts more accurately than any other 3D printing system. With a wide operating temperature range, the nFDTM is capable of printing a variety of materials including but not limited to ABS, PLA, and ULTEM. The nFDTM also features two thermocouple slots, one for the temperature control loop and a second for a safety limiter. A heater control system and heated bed are required. Material Needed: 1.75mm Filament (+/- 0.1mm) Temperature Range: Up to 400° C (Up to 752° F) Parts Included: nFDTM Pump with dovetail K-type thermocouple (2) Nozzle heater Heat break Heating Element Ceramic nTip Features:  Light weight and small factor  Interchangeable nozzles  Reduced Resolution  Broad material compatibility Standard ceramic nTip size chart (Contact us for larger or custom sizes) nTip Part# nScrypt Inc., 12151 Research Parkway, Suite 150, Orlando, FL 32826