BAT SERIES 3DN-300
1Pages

BAT Series 3Dn-300 BioAssembly Tool The nScrypt BioAssembly Tool (BAT Series) is a specially configured 3Dn-300 system designed for bioprinting capable of dispensing all the ingredients needed to construct living tissue (biomaterials, living cells, growth factors, scaffolds, extracellular matrices, etc.) with exceptional flexibility and cell viability. Cell viabilities in excess of 95% are enabled by patented low sheer stress nozzle designs, and flexibility is afforded by the "design and print" features of digital printing. The system employs stainless steel surfaces and includes up to five independent devices each utilizing nScrypt’s patented technology integrated with ηVision calibration and guidance in a HEPA filtered environment as options. SmartPump™ 100 - Gen.2 The nScrypt SmartPump™ features discrete volumetric control down to 100 picoliters. The patented valve and ηTip design provides unmatched control and precision enabling dimensions as small as 20 microns. A heated version can go up to 90C. Recommended materials include: Extracellular Matrix Materials (ECM) The patent pending nFDTM has the ability to print thermoplastics with temperatures ranging from room temperature up to 400C. It provides the smallest resolution and smoothest surface finish. Compatible with standard industry 1.75mm diameter filament. The same patented ceramic pen tip (as small as 12.5um orifice) can be used and is interchangeable between nFD™ and SmartPump™. Recommended materials include:  Wide range of bio polymers  Wide range of other thermal plastics Hyaluronic Acid (HA) Polycaprolactone (PCL) Living Cells (fibroblasts, endothelial cells, stem cells) SmartPump™ 100 Spray Attachment Connects to the nScrypt SmartPump™ 100 and utilizes directed air flow and patented ηTips to coat surfaces with lower-viscosity materials. Recommended materials include:  Collagen Type I  Nutrient Carriers Pneumatic Pressure Pump Pneumatically driven pump utilizes air pressure regulation for on/off dispensing control. Recommended materials include: Living Cells Extracellular Matrix Materials (ECM) Collagen Type I HA Motion System X/Y Drive System X/Y Printing Speed X/Y Travel Range X/Y Accuracy X/Y Bidirectional Repeatability X/Y Resolution Z Drive System Z Maximum Speed Z Travel Range Z Accuracy Z Bidirectional Repeatability Z Resolution High Precision Linear Gantry Platform Linear Brushless Servomotor Up to 500 mm/s 300 x 300 mm ± 5 µm ± 2 µm 0.1 µm Ball Screw/Brushless Servomotor 100 mm/s 150 mm ± 5 µm ± 1 µm 0.5 µm Computer & Software Commercial PC & Widescreen Monitor USB, Firewire, Ethernet, RS-232/485 nScrypt Machine Software Stainless steel base Stainless risers & cross-bridge Category 3 Safety Enclosure STRONGARM Workstation included Steel frame with leveling feet included Dimensions (LxWxH) Weight Electrical Requirements Compressed Air Requirements Vacuum Requirements 80 to 120 psi, dry filtered air or nitrogen 2 m³/h minimum flow rate (if applicable)