3Dn series
1Pages

X/Y Accuracy X/Y Bidirectional Repeatability X/Y Maximum Acceleration X/Y Drive System X/Y Maximum Speed X/Y Travel Range X/Y Resolution ± 10 µm (± 5µm*) ± 1 µm 0.5g (no load) Ball Screw/Brushless Servomotor 300 mm/s 300 x 150 mm 0.5 µm ± 5 µm ± 2 µm 2g (no load) Linear Brushless Servomotor 500 mm/s 300 x 300 mm 10 nm - 1 µm ± 1.5 µm ± 0.5 µm 5g (no load) Linear Brushless Servomotor 500 mm/s 450 x 450 mm 10 nm - 1 µm Z Accuracy Z Bidirectional Repeatability Z Drive System Z Maximum Speed Z Travel Range Z Resolution ± 5 µm ± 0.7 µm Ball Screw/Brushless Servomotor 100 mm/s 150 mm 0.5 µm Machine Tool Software, PC and Monitor Included User Interface Base Plate Cast Aluminum STRONGARM Workstation Available Steel Stand with Casters Available 38 x 36 x 48” 97 x 92 x 122 cm 500 lbs 227 kg WorkStation Dimensions Weight Electrical Requirements Compressed Air Requirements Vacuum Requirements Cast Aluminum Risers & Cross-Bridge Category 3 Safety Enclosure STRONGARM Workstation Included Steel Frame with Leveling Feet Included 44 x 37 x 69” 112 x 94 x 176 cm 3000 lbs 1361 kg Single Phase, 120VAC, 20 A** STRONGARM Workstation Included Steel Frame with Leveling Feet Included 54 x 51 x 84” 112 x 94 x 176 cm 3000 lbs 1361 kg Single Phase, 120VAC, 20 A** 80 to 120 psi, Dry Filtered Air or Nitrogen 2 m³/h Minimum Flow Rate SMEMA Capable (Belt Feed) Additional Options Platforms Custom Platform Size Bio-Compatible Upgrade Cleanroom Stages Upgrade SmartPump™ 100 Heated SmartPump™ 100 nFD Pump Real-Time Process View nVision nVision Pro Overhead HEPA Filtration UV Spot Curing Source Pick and Place Load Capacity Upgrade Pneumatic Pressure Pump Up to Quad-Head Tool Plate Heated Pneumatic Pressure Pump nScan Surface Mapping Vacuum Chuck Heater Control System nPD Heated Positive Displacement Pump nScan Surface Mapping Pro Rotary Stage Factory Enhanced Stage Calibration* Three-head Mixer Pump* Post-Process Inspection Laser Integration*** * Only available for the 3Dn-Tabletop Platform. ** Power requirements may be adjusted to meet specific customer needs. *** Customization option subject to customer needs. Varying system sizes may be available on request. All values listed are approximations. Pump, accessory, and configuration options may vary. Option availability is dependent on gantry size and specific customer needs - please contact info@nscrypt.com with any questions. nScrypt Inc., 12151 Research Parkway, Suite 150, Orlando, FL 328