Technical Document Summary: Cutting Tool Specifications

This document provides detailed specifications and parameters for a series of cutting tools, identified by unique code numbers. The measurements are given in millimeters (mm) and prices in Japanese Yen (JPY).

1. Product Identification and Dimensions

• Code Numbers: A list of codes ranging from 04-00050-01000 to 04-00050-10000, each corresponding to a specific tool variant.
• Overall Length: Not explicitly listed but implied to vary with each code.
• Effective Length, Shank Diameter, Neck Diameter, Diameter, Neck Taper Angle, Flute Length: These are key dimensional parameters for each tool, though specific values are not provided in the excerpt.
• Diameter Sizes: Range from 0.1 mm to 1 mm in increments of 0.05 mm, indicating a fine gradation of tool sizes.

2. Operational Parameters

• Helix Angle: Mentioned but no specific values provided.
• Coating and Material: Indicated as important attributes, though details are missing.
• Feed and Spindle Speed: Parameters for machining operations, including step feed and spindle speed, are referenced but not detailed.
• Work Material: The document suggests consideration of the material being machined, affecting operational parameters.

3. Safety and Notes

• Safety Attention: A caution note emphasizes the importance of safety during use.
• Specifications Disclaimer: The document states that specifications may change without notice for improvement purposes.

4. Additional Information

• MSDH: Possibly a model or series designation.
• Date Reference: "08' 10" may indicate a date or version but is unclear.

Summary: This technical document outlines a range of cutting tools with precise dimensional and operational parameters. While specific numerical values for many parameters are not included in the excerpt, the structure indicates a comprehensive catalog intended for selecting appropriate tools based on size, coating, material, and machining conditions. Safety considerations and the possibility of specification updates are highlighted.