Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Novoflow GmbH
  3. NDCF 2
video corpo

NDCF 2

NDCF 2
1 / 1 PageView full catalog

NDCF 2

Product catalog summary
Filtration System Overview
The NDCF 2 filtration system is designed for various filtration applications with a maximum filter area of 2 m². It features filter discs with diameters of 312 mm and 374 mm, and pore sizes ranging from 5 nm to 1100 nm. The system can accommodate 16 or 10 filter discs depending on the configuration.
Technical Specifications
  • Connections: Inlet, filtrate, and overflow connections are 33.7 mm and 21.3 mm clamps, compatible with DIN 32676 series B, with adapter options available.
  • Volume: Approximately 60 liters.
  • Operating Pressure: 0 to 6 bar, with a backwash pressure of 0 to 2.5 bar.
  • Temperature Range: 5 to 60 °C, depending on membrane type and other factors.
  • pH Range: For microfiltration, 0 to 12 pH (max. 40 °C) and 0 to 13 pH (max. 50 °C); for ultrafiltration, 1 to 12 pH (max. 40 °C) and 1 to 13 pH (max. 40 °C).
  • Speed: 100 to 450 U/min.
  • Power Requirements: 400 V / 50 Hz, 16 A, with a power consumption of 5000 Watts.
  • Control System: Siemens S7, requiring 6 bar dry and clean control air.
  • Dimensions and Weight: 1500 x 600 x 1500 mm, weighing approximately 615 kg.
Construction and Materials
  • Media Connection: Tool-free connection via clamp connection.
  • Pipeline: Stainless steel media lines.
  • Valves: Angle seat valve made of EPDM and stainless steel.
  • Housing: Made from 1.4301 stainless steel, with other materials available upon request.
  • Pump: Equipped with a powerful progressive cavity pump.
  • Noise Level: Approximately 70 dB (A).
Additional Notes
Variants and special designs are possible to a limited extent. The recommended temperature and pH ranges depend on the membrane type, operating time, and other factors. Information on membrane resistance is provided without guarantee, and novoflow assumes no liability. Technical changes may be made by novoflow.
See more

Catalog excerpts

NDCF 2-1

DATA SHEET NDCF 2 filtration system NDCF 2 * variants / special designs possible to a limited extent ** recommended temperature range, depending on membrane type, operating time, pH value, etc. *** recommended pH range, depending on membrane type, operating time, temperature, etc. Information on membrane resistance is without guarantee. novoflow assumes no liability. novoflow reserves the right to make technical changes. Nelkenweg 10, D-86641 Rain/Lech, Tel.: +49 9090 701150, [email protected], www.novoflow.com

 Open the catalog to page 1

All Novoflow GmbH catalogs and technical brochures

  1. NF-808
    NF-808

    1  Page

  2. NF-LC-CW 1500
    NF-LC-CW 1500

    1  Page

  3. NF-LC-M 1000
    NF-LC-M 1000

    1  Page

  4. NF-LC-S 500
    NF-LC-S 500

    1  Page

  5. NF-LC-S 300
    NF-LC-S 300

    1  Page

  6. NF-LC-S 200
    NF-LC-S 200

    1  Page

  7. NF-LC-S 100
    NF-LC-S 100

    1  Page

  8. NF-LW3-K 3000
    NF-LW3-K 3000

    1  Page

  9. NF-LW3-K 2000
    NF-LW3-K 2000

    1  Page

  10. NF-LW3-K 1500
    NF-LW3-K 1500

    1  Page

  11. NF-LWA-K 1500
    NF-LWA-K 1500

    1  Page

  12. NDCF 15
    NDCF 15

    1  Page

  13. NDCF 10
    NDCF 10

    1  Page

  14. NDCF 5
    NDCF 5

    1  Page

  15. NDCF 3
    NDCF 3

    1  Page

  16. NDCF 1
    NDCF 1

    1  Page

  17. CRD05
    CRD05

    1  Page

  18. CRD02
    CRD02

    1  Page

  19. NF-A9plus
    NF-A9plus

    1  Page

  20. HAND-HELD LASER WELDING UNIT
    HAND-HELD LASER WELDING UNIT

    4  Pages

  21. HAND-HELD LASER CLEANING DEVICE
    HAND-HELD LASER CLEANING DEVICE

    4  Pages

  22. CRD01
    CRD01

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.