- Catalogs
- Novoflow GmbH
- NDCF 15
NDCF 15
1 / 1 PageView full catalog
NDCF 15
Product catalog summary
Filtration System Overview
The NDCF 15 filtration system is designed for efficient filtration with a maximum filter area of 15 m². It features 80 filter discs with a diameter of 374 mm, capable of handling pore sizes ranging from 5 nm to 1100 nm.
The NDCF 15 filtration system is designed for efficient filtration with a maximum filter area of 15 m². It features 80 filter discs with a diameter of 374 mm, capable of handling pore sizes ranging from 5 nm to 1100 nm.
Technical Specifications
- Connections: Inlet, filtrate, and overflow connections are 33.7 mm and 21.3 mm clamps, compatible with DIN 32676 series B, with adapter options available.
- Volume and Pressure: The system has a volume capacity of approximately 60 liters, with an operating pressure range of 0 to 6 bar and a backwash pressure of 0 to 2.5 bar.
- Temperature and pH Range: The recommended operating temperature is between 5 and 60 °C. The pH range for microfiltration is 0-12 (max. 40 °C) and 0-13 (max. 50 °C), while for ultrafiltration, it is 1-12 (max. 40 °C) and 1-13 (max. 40 °C).
- Speed and Power: The system operates at speeds between 100 and 450 U/min, with a connection voltage of 400 V / 50 Hz and a power requirement of 7500 Watts.
- Control and Construction: It uses a Siemens S7 control system, with dimensions of 2300 x 1000 x 2250 mm and a weight of approximately 1000 kg. The enclosure weighs 150 kg.
- Materials and Noise Level: The system features stainless steel media lines and housing, with a noise level of approximately 70 dB (A).
Additional Features
- Tool-free media connection via clamp connection.
- Equipped with a powerful progressive cavity pump.
- Valves are angle seat type with EPDM/stainless steel construction.
Notes
- Variants and special designs are possible to a limited extent.
- Temperature and pH recommendations depend on membrane type, operating time, and other factors.
- Information on membrane resistance is provided without guarantee, and novoflow assumes no liability.
- Technical changes may be made by novoflow.
See more
Catalog excerpts
DATA SHEET NDCF 15 filtration system NDCF 15 * variants / special designs possible to a limited extent ** recommended temperature range, depending on membrane type, operating time, pH value, etc. *** recommended pH range, depending on membrane type, operating time, temperature, etc. Information on membrane resistance is without guarantee. novoflow assumes no liability. novoflow reserves the right to make technical changes. Nelkenweg 10, D-86641 Rain/Lech, Tel.: +49 9090 701150, [email protected], www.novoflow.com
Open the catalog to page 1All Novoflow GmbH catalogs and technical brochures
NF-8081 Page
NF-LC-CW 15001 Page
NF-LC-M 10001 Page
NF-LC-S 5001 Page
NF-LC-S 3001 Page
NF-LC-S 2001 Page
NF-LC-S 1001 Page
NF-LW3-K 30001 Page
NF-LW3-K 20001 Page
NF-LW3-K 15001 Page
NF-LWA-K 15001 Page
NDCF 101 Page
NDCF 51 Page
NDCF 31 Page
NDCF 21 Page
NDCF 11 Page
CRD051 Page
CRD021 Page
NF-A9plus1 Page
HAND-HELD LASER WELDING UNIT4 Pages
CRD011 Page
Related Searches
- Welding system
- Automatic welding machine
- Industrial cleaning system
- Filtration unit
- Metal welding machine
- Manual welding machine
- Laser sealer
- Parts cleaning system
- VOC-free liquid filtration unit
- Standalone welding machine
- Compact sealer
- Manual cleaning system
- Steel welding machine
- 230V single phase welding machine
- Mobile cleaning equipment
- Integrated welding machine
- Gas filtration unit
- Aluminum welding machine
- 380V three-phase welding machine
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.