- Catalogs
- Novoflow GmbH
- NDCF 10
NDCF 10
1 / 1 PageView full catalog
NDCF 10
Product catalog summary
Filtration System Overview
The NDCF 10 is a filtration system designed for various applications with specific technical specifications and operational parameters.
Technical Specifications
Additional Notes
The NDCF 10 is a filtration system designed for various applications with specific technical specifications and operational parameters.
Technical Specifications
- Filter Area: Maximum of 10 m²
- Filter Discs: Diameter options of 312 mm and 374 mm
- Pore Sizes: Range from 5 nm to 1100 nm
- Number of Filter Discs: 80 for 312 mm discs, 54 for 374 mm discs
- Connections: Inlet, filtrate, and overflow connections are 33.7 mm and 21.3 mm clamps, DIN 32676 series B, with adapter options
- Volume: Approximately 60 liters
- Operating Pressure: 0 to 6 bar
- Pressure Backwash: 0 to 2.5 bar
- Temperature Range: 5 to 60 °C, depending on membrane type and other factors
- pH Range: Microfiltration: 0-12 pH (max 40 °C) / 0-13 pH (max 50 °C); Ultrafiltration: 1-12 pH (max 40 °C) / 1-13 pH (max 40 °C)
- Speed: 100 to 450 U/min
- Connection Voltage: 400 V / 50 Hz, 16 A
- Control Air: 6 bar, dry and clean
- Power: 7500 Watts
- Control System: Siemens S7
- Dimensions: 2300 x 1000 x 2250 mm
- Weight: Approximately 950 kg (enclosure weight 150 kg)
- Media Connection: Tool-free connection with clamp connection
- Pipeline: Stainless steel media lines
- Valves: Angle seat valve made of EPDM and stainless steel
- Housing: 1.4301 stainless steel, other materials available upon request
- Pump: Powerful progressive cavity pump
- Noise Level: Approximately 70 dB (A)
Additional Notes
- Variants and special designs are possible to a limited extent.
- Temperature and pH ranges are recommended based on membrane type, operating time, and other factors.
- Information on membrane resistance is provided without guarantee, and novoflow assumes no liability.
- Technical changes may be made by novoflow.
See more
Catalog excerpts
DATA SHEET NDCF 10 filtration system NDCF 10 * variants / special designs possible to a limited extent ** recommended temperature range, depending on membrane type, operating time, pH value, etc. *** recommended pH range, depending on membrane type, operating time, temperature, etc. Information on membrane resistance is without guarantee. novoflow assumes no liability. novoflow reserves the right to make technical changes. Nelkenweg 10, D-86641 Rain/Lech, Tel.: +49 9090 701150, [email protected], www.novoflow.com
Open the catalog to page 1All Novoflow GmbH catalogs and technical brochures
NF-8081 Page
NF-LC-CW 15001 Page
NF-LC-M 10001 Page
NF-LC-S 5001 Page
NF-LC-S 3001 Page
NF-LC-S 2001 Page
NF-LC-S 1001 Page
NF-LW3-K 30001 Page
NF-LW3-K 20001 Page
NF-LW3-K 15001 Page
NF-LWA-K 15001 Page
NDCF 151 Page
NDCF 51 Page
NDCF 31 Page
NDCF 21 Page
NDCF 11 Page
CRD051 Page
CRD021 Page
NF-A9plus1 Page
HAND-HELD LASER WELDING UNIT4 Pages
CRD011 Page
Related Searches
- Welding system
- Automatic welding machine
- Industrial cleaning system
- Filtration unit
- Metal welding machine
- Manual welding machine
- Laser welding machine
- Parts cleaning system
- VOC-free liquid filtration unit
- Standalone welding machine
- Compact sealer
- Manual cleaning system
- Steel welding machine
- 230V single phase welding machine
- Mobile cleaning equipment
- Integrated welding machine
- Gas filtration unit
- Aluminum welding machine
- 380V three-phase welding machine
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.