Ultrasonic Thickness gauge Ultrasonic Thickness Gauge UT-1M is used for operational non-destructive testing of the thickness of products with one-way access, at the moment this method is the most common in the world for solving such tasks. The method is based on the property of materials to conduct ultrasound, ultrasonic wawes are excited with the piezoceramic plate in the transducer and penetrates into the material through the couplant, then reflected from the bottom surface of the tested sample, and returns to the transducer. Based on the obtained sound transit time in the material, the device calculates the thickness in accordance with the velocity of propagation of ultrasonic waves in the test sample. The thickness value is displayed on the device’s display, the measurement process takes about 1 second. Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

The results of measurement, adjustment, calibration and testing reports of the ultrasonic thickness gauge in smartphone - the innovative NOVOTEST application for smartphones based on Android. The functions of devices have no been so wide before! With the Bluetooth connection, your smartphone is able to control all the functionality of the NOVOTEST ultrasonic thickness gauge without wires. The intuitive interface of the application itself, access to the Internet, email and instant messengers, touch screen, camera, microphone and GPS receiver of the mobile device make the use of NOVOTEST devices...

The main advantages of the Ultrasonic Thickness Gauge UT-1M: • Wide rage of measurements To measure products in a wide range with one transducer, unlike most similar devices, the Ultrasonic Thickness Gauge UT-1M has a gain control function, which allows operator, for example, with a 5 MHz transducer, to measure steel products in the range from 0.5 to 500 mm and more. Using other probes the full measurement range is up to 1500 mm for steel. • B-scan and automatic defect alarm function To visualize the product profile, if necessary not only point measurement, but also scanning, a B-scan is implemented...

Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

• Electronic unit Ultrasonic Thickness Gauge UT-iM (Lab) • Probe/transducer (echo) - i pc for choice: (2.5MHz, 5MHz or 10MHz) Accessory package: • NOVOTEST LAB App for Android gadgets • Operating manual/Quick guide • Transportation plastic case • Electronic unit Ultrasonic Thickness Gauge UT-1M/UT-1M (Lab) • 5MHz (echo-echo) probe 10/2 or 5MHz high-temperature (echo) probe 10/2 • Step Wedge Thickness Calibration Block 10-20-30-40-50 mm (or another) • Accessory package • Electronic unit Ultrasonic Thickness Gauge UT-1M/UT-1M (Lab) • 1.25MHz (echo) probe 20/2 or 2MHz (echo) probe 20/2 • 5MHz (echo)...