T-U2 works on UCI (Ultrasonic Contact Impedance) technology. Unlike the Leeb hardness tester, UCI hardness tester can also be used with small or thin-walled products, as well as parts of complex shape or with areas that need to be tested in hard-to-reach places. UCI Hardness Tester T-U2 is the most optimal option in the world market for the combination of price - quality. Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

Do hardness measurements, calibrate the device, set up a convenient display of values, save the results of hardness measurements, synchronize the archive with your other devices and a PC, transfer measurement results to your colleagues - all this is available with your smartphone thanks to the special NOVOTEST app for Android. Hardness testers have never had such opportunities! Using a Bluetooth connection, your smartphone connects to the hardness tester and you have a completely new device -a new generation hardness tester! The intuitive interface, ample opportunities for documenting results,...

The uci hardness tester t-u2 can be used for samples from 1 mm Using this device, the operator can, without additional fixation and accessories, carry out hardness testing of products weighing just 100g or even less. The uci hardness tester t-u2 main purposes are products of complex shape (gear teeth, bearings etc.) And hard-to-reach places that need to be tested (grooves, radius surfaces, welds and heat affected zones etc.) The imprint after measuring with uci hardnes tester is very small, the method is considered the most non-destructive of the known implemented in portable hardness testers....

Special type of probe with increased load. To carry out the measurement, it is necessary to apply a load of 10 kgf (set automatically by the converter).Low surface cleanliness requirements. - Heat-treated and cemented parts with poorly prepared surface. - Measurement on blades, on the inner surface of pipes, holes with high roughness. The main type of probe for solving most hardness measurement tasks. To carry out the measurement, it is necessary to apply a load of 5 kgs (set automatically by the converter). Medium surface cleanliness requirements. - Heat-treated and cemented parts, such as shafts,...

Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

• Hardness tester; • Operating manual; • Calibration certificate; • BAdditional UCI probes. Also, after the purchase if will be needed, user can order the additional Leeb probe (D, DC, DL, C, D+15, E, G), with activation code and will get combined hardness tester with two probes (UCI+Leeb); • Hardness test blocks; • Portable grinding machine; • Case for hardness tester. Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)