NOVATEST - Load test kit 01 The Oleodynamic pressure system is used to perform static load tests with concentrated loads on floors. The load test procedure uses hydraulic jacks positioned in strategic points to induce internal forces equivalent to those resulting from the distributed loads. Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

NOVATEST - Load test kit 02 This method offers many advantages in terms of safety as it allows a better control of the applied load. Compared to traditional methods, the Oleodynamic thrust system appears to be more rapid, economical and safe. The system with concentrated loads is also used in cases where the use of the distributed loads is mainly applicable for logistical reasons. The system consists of a series of extension cords of various lengths and two supporting cross members (lower and upper), a hydraulic jack (simple or double effect) and by a hydraulic pressure boosting unit (manual...

NOVATEST - Load test kit 03 • 1 Flexible hose High Strength L=5mt; • 1 Manifold 3 way (1 input / 2 outputs); • Quick-release couplings screw 3/8 “NPT with protective caps. NB: The system can be customized and adapted to the test specifications required by the customer. The kit for load tests with concentrated loads, in its standard composition (2 loading points), is provided as follows: • No.1 Manual pump with lever; • No.1 Unidirectional flow control vave with end regulation; • No.1 Manifold 3 way (1 input / 2 outputs); • No.2 Hoses with quick couplings 3/8 “NPT and protective caps. Possibility...