The Pull-Off is a direct method of proof consists of a semi-destructive extraction, used to estimate the tensile strength of materials. Recovery linked to the substrate, such as wall cladding (plaster or other). Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

The test is prepared by pasting directly on the surface of the material to investigate, in an area specially designed with appropriate resins, a circular metal plate 0 50 mm. Before the test is performed along the cutting edge of metal plate in order to release the evidence from the surrounding area. The cut should have a depth at least equal to the thickness of the coating. Maturation occurred at the resin by the application to the hard pressure of posting in the direction normal to the wall jack should be fitted with calibrated pressure gauge, which exercises opposing force on a support structure....

• N.1 Single-stage lever pump 0-700 bar, low flow rate, 0.5 L (*); • N.1 High-precision digital manometer 0-700 bar with min/max peak indication, complete with calibration report (Accredia reference) (*); • N.1 Gauge holder fitting (*); • N.1 Hollow cylinder with single-acting spring return, 10-ton, 50 mm stroke (**); • N.1 Tripod reaction spacer with adjustable feet; • N.1 Pull rod with self-leveling head and lock nut; • Carrying case with trolley (*); • Flexible hose with quick-connect screw couplings and protective caps (**). (*) Compatible with Pull-Out STD Kit, Flat Jack Kit, Plate Load...