The need to survey larger areas and apply 3D processing and visualization techniques has led to the development of advanced GPR systems that include multiple GPR antennas connected to form a GPR array. The ImpulseRadar Raptor solution contains several individual antenna elements (transmitters and receivers) that are arranged to form multiple measurement channels operating simultaneously and in close proximity to each other. Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

Although the Raptor system may seem more complex than a standard GPR system, the following interpretation is significantly simpler. 3D processes produce photo-like images, greatly simplifying otherwise tedious interpretation work. It becomes a very intuitive process. A GPR array collects far more data in one pass compared to a typical GPR system. But since the Raptor system is also based on real-time technology, surveys along each line are equally fast. As a result, surveying large areas can be done more quickly and efficiently. Routine applications now include utility mapping, archaeological...

• Frequency: Raptor-45 has a central frequency of 450 MHz. • Applications: Arrays configured with Raptor 45 units are suitable for utility mapping, archaeological surveys, and railway investigations, among other applications. • Frequency: Raptor-80 has a central frequency of 800 MHz • Applications: Suitable for applications requiring higher resolutions, roadbed layers, concrete scanning, etc. The system is modular and expandable. Operators can choose the number of receivers/ transmitters they need for their application and can build their own antennas using the necessary number of Tx/Rx modules...

The data manager enables practical and intuitive organization of information. The user has full control over views and outputs during various processing stages, while the layer manager offers the same for interpretation procedures. Talon-2 Data Acquisition and Control Software The modular plug-and-play design simplifies the configuration of any number of channels from a minimum of 4 to a maximum of 30 or user-defined custom solutions. This allows the customization of the array arrangement and vehicle solution to meet your specific needs. Talon acquisition and control software provides an easy...

Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

User Interface, Laptop PC (min. requirements) • Quick and easy configuration and start-up • Positioning configuration and device sync monitoring • Visualization of radargram for each channel • Data merge, storage and export • OspreyView (application of a novel method of visualizing 3D-GPR data) • Effective workflows • Efficient sub-surface imaging Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN) For other specifications, please refer to the attached documentation (Download area).

Raptor-45 / 8 channels with Push Cart standard configuration, includes: • N.1 Raptor Push Cart v2 4-wheel • N.1 Plastic sheet Raptor 45 Assembled (AC00083) • N.10 Tx trig coax cable RG58 24cm • N.3 Rx Sync cable 8pin 20cm Green CAT cable - Yellow • N.2 Sync/end connector - Yellow • N.1 External GPS cable 2m - blue • N.1 RAM Mount X-grip 12” tablet holder complete • N.1 GPS-unit for improved positioning/timing • N.1 PC to switch cable M12xcode to RJ45 - 200cm USB-Drive 16GB -Condor, Talon, CrossPoint and Manual • N.1 Condor - New Subscription 12 months with Raptor order • N.1 Raptor Push Cart...