Mechanical Concrete Test Hammer Reliability and careful selection of components, 10 years proven experience as manufacturer of NDT instruments, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type test hammer – Novatest design – has been modified to get a higher degree of reliability as far as correlation curves are concerned, obtaining the new SonReb method. Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

To develop new curves, 50 cubic samples (200x200mm) of twenty distinct classes of concrete have been tested. The samples have been subjected to Non-Destructive Tests (hammer indexes and ultrasonic pulses propagation) and Destructive Tests (press-crashing). By analyzing the results of the tests, it has been assessed that the CONCRETO N mechanical concrete test hammer is an invaluable tool to check and estimate the quality of concrete. Maximum reliability is achieved upon strictly following the manufacturer’s instructions. 7 good reasons for choosing CONCRETE N: • Because it comes from a generation...

• Instruction manual, MpA - Psl graphs; • Abrasive wheel with box; • Container of phenolphthalein with nebulizer; • Rigid case for transport; • Calibration certificate and Quality Control; Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)