Non-destructive testing instrument All-in One - Ultrasonic for Concrete structures, Sonic investigations for masonry, Pile Integrity Test (PIT), Cross-Hole on foundation piles A single acquisition unit that, by purchasing different specific and modular “Kits”, enables the execution of sonic and ultrasonic tests for on-site and laboratory characterization of materials such as concrete, masonry, and natural stone, as well as cross-hole tests, PIT (Pile Integrity Test) on foundation piles and diaphragms, and tension force evaluation on chains and tie rods (SolTiRo). Contact Kit / MCHA kit / PIT kit The All-in-One system is a robust and reliable device equipped with various piezoelectric sensors and dedicated probes. It features a multichannel A/D board with selectable sampling frequencies ranging from 10 kHz to 6.25 MHz (up to 12.5 MHz single-channel). All acquired signals are displayed, processed, and saved directly on the pre-installed software on the tablet. Connection between the All-in-One unit and the tablet is via WiFi. Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

• Drastic reduction in acquisition time • Smart probes, including signal generation and active preamplification • Acquisition unit with high dynamic range and low electronic noise • Ultrasonic contact probes (55-20 kHz) with hammer, dedicated software • Durable and reliable equipment • Echo and low-deformation methods, processing software included • Fully compliant with major international standards • Characterization of concrete, masonry, and natural stones both on-site and in the lab • Integrity assessment of foundation piles and diaphragms using Cross Hole technique • Integrity assessment...

Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

The accelerometer is supplied with a special magnetic support, it is possible to fix it using cable ties or other restraint systems. Optionally, a fixing system with a C-bracket and adjustable fixing screw is available. Contact us for: purchase, rental, quote. I NOVATEST Engineering Solutions

• Compliant with: UNI EN 12504-4, ASTM D2845-08, ASTM C597-02 • Sonic and ultrasonic measurement frequency: 55 kHz or 20 kHz, highly sensitive active piezoelectric receivers • Suitable also for wooden samples • Integrated instrumented hammer PIT Kit • Compliant with: ASTM D5882-07 • Low-strain integrity and Echo methods • Solgeo “PPS” software included • Compliant with: ASTM D6760-16 • Simultaneous cross-hole measurements along three paths in pile foundations • Synchronization pulse via encoder • Results readily printable • High-power transmitter and high-sensitivity active piezoelectric receivers...

The accessory equipment supplied with the All-in-One acquisition unit includes the TA-50g accelerometer. The system thus includes: • All-in-One acquisition unit Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)