*mydirectindustry

Catalogs
Novatest
A1221 Anchor - Technical Sheet

A1221 Anchor - Technical Sheet

Product catalog summary

Product Overview:
The NOVATEST A1221 ANCHOR is an ultrasonic low-frequency tester designed for in-situ quality assessment of concrete anchors, solid rebars, and reinforcement. It is primarily used for non-destructive testing of anchor bolts and similar structural elements.

Technical Specifications:

Operating frequency range: 25-250 kHz
Maximal data acquisition length: 4000 μs
Assessment length: 0.5-3.0 m
Embedded rods assessment length: up to 1 m
Assessable rod diameter range: 20-40 mm
Material velocity range: 500-15,000 m/s
Transmitter output voltage: ±20, ±100, ±200 V
Transmitter pulse form: Bipolar meander, 0.5÷5.0 periods
Pulse repetition rate: 1-45 Hz
Gain setup range: 0-100 dB, step 1
Number of programmable points of DAC function: 24
Dynamic range of DAC function: 30 dB
Power supply: Built-in battery with 14 hours operation time and 3 hours charging time
Display type: TFT (640 x 480)
Electronic unit dimensions: 260×156×43 mm
Weight: 0.8 Kg
Operating temperature range: -20 to +45 ºC
Max relative air humidity at +35°C: 95%

Applications:

Detection of anchor breaks
Residual length/fraction assessment
Adhesion quality assessment
Assessable bolt/rebar diameter: 20-40 mm
Not grouted assessment length: up to 8 meters
Minimal assessment length: 0.3 meter
Assessable grouting depth in concrete: up to 1 meter

Included Accessories:

A1221 Anchor electronic unit
Power adapter AC 80-264 / VDC 15V
USB 2.0 Cable USB-A to USB Micro-B
Lem00 to Lemo0 cable, 2.25m
Carrying map case
Soft Cover
Instrument support
Hard shell case
Low frequency piezoelectric transducer S0205, 25 Khz
Optional transducers: S0206, 50 KHz and S0208, 100 KHz
Rexilite test block

Contact Information:
For purchase, rental, or quotes, contact NOVATEST at Via Albertini, 36/F8, c/o Gross Ancona, 60131 Ancona (AN), T. +39 071.2415386, [email protected], novatest.it

Catalog excerpts

An ultrasonic low-frequency tester for in-situ quality assessment of concrete anchors, solid rebars and reinforcement. Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

Open the catalog to page 1

The main application field of A1221 ANCHOR is the non-destructive testing of anchor bolts and similar structural elements. Following evaluations can be performed by placing ultrasonic transducer on the free outer end of the bolt: • Detection of anchor breaks • Residual length/fraction assessment • Adhesion quality assessment • Assessable bolt/rebar diameter: 20-40 millimeters • Not grouted assessment length: up to 8 meters • Minimal assessment length: 0.3 meter • Assessable grouting depth in concrete: up to 1 meter Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini,...

Open the catalog to page 2

• No.1 A1221 Anchor electronic unit • No.1 USB 2.0 Cable USB-A to USB Micro-B • No.1 Hard shell case • No.1 Low frequency piezoelectric transducer S0205, 25 Khz • No.1 Low frequency piezoelectric transducer S0206, 50 KHz (optional) • No.1 Low frequency piezoelectric transducer S0208, 100 KHz (optional) • No.1 Rexilite test block Engineering Solutions Contact us for: purchase, rental, quote. Via Albertini, 36/F8 c/o Gross Ancona 60131 Ancona (AN)

Open the catalog to page 3

All Novatest catalogs and technical brochures

Archived catalogs

Products Overview NDT
16 Pages
MICRODRONES
181 Pages
IHand30
2 Pages
iBoat BS3 USV
2 Pages
SLAM100
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list