OrionLXm™ Automation Platform Key Features • Runs all Orion software options and protocols same firmware • All connections and diagnostic LEDs on the front face • Universal mounting: panel, 19” rack or DIN-rail • Complete suite of Cybersecurity features The OrionLXm is a physically smaller OrionLX™ designed for applications requiring fewer connections and less space; typically smaller distribution substations and OEM and pole-top RTU applications. 8.5” wide 2RU high, 6” deep Up to two Optional Slots for: • 4-port RS-232/485 Cards (shown) • 4-port ST Fiber Cards • One Bit Synchronous Port and 3 RS-232/485 Ports • 12 in / 4 out I/O Cards Wide-range Power Supply Specifications Environmental Operating Temperature Storage Temperature Operating Humidity Two Built-in Ethernet Ports Optional Built-in Six-Port Switch and Fiber Optic Mounting Options -40°C to +70°C -40°C to +85°C 5 to 95% non-condensing Performance/Capabilities IED/SCADA Points 20,000 DNP3 Connections to IEDs 128 Refresh Rate < 2 sec; typical Processor CPU 800MHz Events Storage (non-volatile) 4GB Horizontal Panel Mount - Conventional Horizontal Panel Mount - Top of panel and bottom of panel variations Physical Connections IRIG-B Input: Unmodulated or Modulated Twisted Pair Ethernet 2 RJ45 10/100 copper Maintenance Port USB Type B Connector Discrete Input LV: 12-24V dc nominal HV: 48-125V dc nominal Alarm Contact Form B relay Power Supply Input Voltage Vertical Panel Mount #1: 24-250V dc ± 15%, 120-240V ac ± 15%, 50-60Hz #2: 12V dc (10.5-15.0V dc) Power Required 10 Watts (typical) 15 Watts (max) Horizo

Optional Built-in Six-Port Switch and Fiber Optic The OrionLXm can be ordered with a six-port unmanaged switch, or with one port either Multimode or Single Mode fiber optic. Ordering options below: Option 1E6E E0: Copper E1: Six-port Copper Switch E0: One port with Copper Ethernet TCP/IP 10BaseT/100BaseTX (NIC #1) E1: Six-port unmanaged switch with Copper Ethernet TCP/IP 10BaseT/100BaseTX (NIC #2) Option 1M6E E0: Fiber (Multimode) E1: Six-port Copper Switch E0: One port with Multimode Fiber Ethernet TCP/IP 100FX 1310nm, max 2km LC Connector (NIC #1) E1: Six-port unmanaged switch with Copper Ethernet...