1. Catalogs
  2. Novasina AGnsens-ht-eis
  3. nLink Analog IP Transmitter (2 analog output)
video corpo

nLink Analog IP Transmitter (2 analog output)

nLink Analog IP Transmitter (2 analog output)

nLink Analog IP Transmitter (2 analog output)

Product catalog summary
Product Overview: The nLink Analog IP Transmitter is a dual-channel device with IP67 protection, designed for use with nSens sensors. It offers configuration via NFC or USB without needing an external power supply.
Specifications:
  • Power Supply: 24V DC, permissible range 5 to 39V, with power consumption under 0.5W.
  • Outputs: Two scalable analog outputs, current (0/4..20mA) or voltage (0/2..10V).
  • Load: Current load min. 0 Ω / max. 500 Ω; Voltage load min. 10 kΩ / max. ∞ Ω.
  • Material: ABS housing, lead-free soldering (RoHS compliant).
  • Temperature: Operating 0 to 50°C, storage -10 to 60°C (non-condensing).
  • Safety and EMC: Complies with IEC 61010-1:2010, IEC 61000-6-2:2005, and related standards.
Installation:
  • Uses a push-in connection system with a clamping range of 0.13 - 1.5mm².
  • Wire specifications include plastic collar ferrule and wire end ferrule options.
  • Recommended to separate interference-emitting wires from measurement units and avoid parallel guidance with power cables.
Accessories:
  • nSens cable extensions available in 5m and 2m lengths.
  • Configuration cable for Android or Windows PC, compatible with NovaZone Flex, Modbus, UMB.
Notes: Technical data is subject to change without prior notice.
See more

Catalog excerpts

nLink Analog IP Transmitter (2 analog output)-1

Cable specifications depend on the installation and have to be defined by the designer or installer. Heavy machinery and other instrumentation should not share the same power supply wiring. Use noise filters and surge protectors if required. For EMC protection it is recommended to take the following measures: • Wires emitting interference must be separated from measurement and analysis units • Parallel guidance of measurement cables and electrical power cables must be avoided, use different channels with separation (see European Standard EN50170 for detailed information)

 Open the catalog to page 1
nLink Analog IP Transmitter (2 analog output)-2

Technical data subject to change without prior notice

 Open the catalog to page 2

All Novasina AGnsens-ht-eis catalogs and technical brochures

  1. LABTOUCH-AW

    1  Page

  2. LABSTART-AW

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.