- Catalogs
- Novasina AGnsens-ht-eis
- nLink Analog EC Transmitter (2 analog output)
nLink Analog EC Transmitter (2 analog output)
1 / 2 PagesView full catalog
nLink Analog EC Transmitter (2 analog output)
Product catalog summary
Product Overview: The nLink Analog EC Transmitter is a dual-channel device designed for installation in electrical cabinets on mounting rails. It supports configuration via NFC radio or USB cable, compatible with Android smartphones or Windows PCs, and does not require an external power supply for configuration. The NFC antenna is detachable.
Compatibility: The transmitter is compatible with all nSens sensors, such as nSens-HT-ENS and nSens-HT-CSS, and supports nSens cables up to 100 meters.
Technical Specifications:
- Power Supply: 24V DC, permissible voltage range of 5 to 39V.
- Power Consumption: Less than 0.5W.
- Analogue Outputs: Two scalable outputs, current (0/4..20mA) or voltage (0/2..10V).
- Load Resistance: Current: min. 0 Ω / max. 500 Ω; Voltage: min. 10 kΩ / max. ∞ Ω.
- Housing Material: PA6.6 (UL94V0), requires installation in a protected cabinet.
- Temperature Range: Operating: 0 to 50°C; Storage: -10 to 60°C (non-condensing).
- Compliance: CE-/EMC Safety: IEC 61010-1:2010; EMC: IEC 61000-6-2:2005, EN 61000-6-2:2005, IEC 61000-6-3:2006+A1:2010, EN 61000-6-3:2007+A1:2011.
Electrical Installation: Utilizes a push-in connection system with a clamping range of 0.13 - 1.5mm². Wire specifications include plastic collar ferrule and wire end ferrule options. It is recommended to separate wires emitting interference from measurement units and avoid parallel guidance of measurement and power cables.
Dimensions & Schematics: The document includes dimensions and schematics for installation, along with details on sensor cables and configuration sets.
Additional Components: Various nSens cables and extensions are available, ranging from 5m to 100m, along with configuration cables for connecting to Android or Windows PCs.
Note: Technical data is subject to change without prior notice.
See more
Catalog excerpts
Cable specifications depend on the installation and have to be defined by the designer or installer. Heavy machinery and other instrumentation should not share the same power supply wiring. Use noise filters and surge protectors if required. For EMC protection it is recommended to take the following measures: • Wires emitting interference must be separated from measurement and analysis units • Parallel guidance of measurement cables and electrical power cables must be avoided, use different channels with separation (see European Standard EN50170 for detailed information)
Open the catalog to page 1
Technical data subject to change without prior notice
Open the catalog to page 2All Novasina AGnsens-ht-eis catalogs and technical brochures
LABTOUCH-AW1 Page
NSENS / NLINK-MODBUS1 Page
Catalogue_Climate_2019_EN35 Pages
Transmitter 20192 Pages
LabMaster-aw neo1 Page
LABSTART-AW1 Page
CLIMMATE SET-AW1 Page
Related Searches
- Measuring device
- Pressure transmitter
- Liquids analyzer
- Analog pressure transmitter
- Benchtop analyser
- Membrane pressure transmitter
- Portable analyzer
- Water analyzer
- Humidity and temperature probe
- Digital pressure transmitter
- Digital gauge
- Portable gauge
- Relative humidity and temperature sensor
- Differential pressure transmitter
- Precision pressure transmitter
- Analyzer for the food industry
- Digital humidity and temperature sensor
- Temperature measuring module
- Humidity transmitter
- Silicon pressure transmitter
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.