CIC-Touch - touchscreen display CIC-Touch This multi display for clean room air parameters such as air humidity, temperature, differential pressure and particles allows to check at a glance the actual climatic parameters in clean rooms. The online data are provided by external sensors and/or contact relays. Besides the actual measurement value, which is shown with the respective unit (e.g. temperature, humidity etc.) and measurement location, also the backlight colour changes according to the actual status. Green colour for values within the threshold and red colour if the threshold is exceeded. The CIC-Touch display can be easily mounted in clean room walls without the need of any screws. The unit can be placed in a wall cavity, snapped in and fixed with clips, which are part of the display unit itself. Thanks to the consequent clean room suitable design, the installation depth is very low and hence the unit fits in all current clean room walls. The smooth front panel complies with the demands of clean room design, is therefore ideal to be cleaned and has no edges subject to be polluted by dust or any dirt. Another highlight of the CIC-Touch is the connectivity such as analogue/digital interfaces, contact relays, ethernet, USB, Modbus, RS-232, RS-485 and a SD card. The CIC-Touch can be easily connected to any external sensor and also integrated in existing monitoring systems. The configuration is performed via the intuitive operation and configuration menu. The CIC-Touch can also be factory configured for specific OEM applications. Applications:  Clean rooms  Isolators  Laminar flow benches  Operating rooms  Laboratories, calibration rooms  Specific OEM solutions Industries:  Semiconductor  Pharmaceutical  Hospitals, OEM , etc. Semi-flush with the wall, no sharp edges, front panel only 2 mm thickness Easy to clean, flat and smooth surfaces Low installation depth and ideal for integration in all current clean room walls Snap-in mounting without any screws Display of up to 4 parameters at the same time Status display with status backlight colour Easy configuration by intuitive menu Several integrated communication interfaces CIC-Touch touchscreen display Recommended ambient sensors to be connected: Air humidity and temperature:  QuantaDat / nSens / nLink-Modbus  HygroMaxx S/R/M  TempMaxx Differential pressure:  Pascal-ST/ZB  PascalMaxx The CIC-Touch is an universal display and any sensor can be connected, it can also be used for installation in existing sensor networks. Climatic Process measurement instruments - 2017 Specifications: Display: graphical display 3,5“ TFT display 70x52mm Panel: 150 x 120 mm (H2O2 res.) Mounting H 127 x W 107 x D 50mm. dimension: incl. connectors Power supply: 24 V AC/DC Inputs: 4 x digital inputs 4 x analogue inputs Outputs: Digital interfaces: USB: 2 x relay contacts 230V ethernet Modb