1. Catalogs
  2. Novasina AGnsens-ht-eis
  3. Application Flyer - Measurement/Visualisation/Control
video corpo

Application Flyer - Measurement/Visualisation/Control

Application Flyer - Measurement/Visualisation/Control

Application Flyer - Measurement/Visualisation/Control

Product catalog summary
Overview: Novasina AG provides solutions for measurement, visualization, and control, focusing on critical points of action with accurate data collection. The system offers central visualization, alerting, and documentation capabilities, both on-site and remotely via PLC/control stations.
Touch Panel Features:
  • Flush mounting with low depth (<50mm) and H2O2 resistant, washable front panel.
  • Acoustic and optical alerting capabilities.
  • Input options include 4x mA or V, 4x relay switches, and Modbus RTU (Master).
  • Output options include 2x relay switches and Modbus RTU/TCP/IP (slave).
Technical Specifications:
  • Display: 3.5" TFT graphical display with capacitive touch-screen.
  • Dimensions: Front panel 150x120mm, mounting dimensions 127x107x50mm.
  • Power Supply: 24 V AC/DC with 12VA consumption.
  • Operating Temperature: -10 to +50°C.
  • Storage: SD card for firmware updates (no data logging).
Measurement Devices:
  • Humidity/Temperature: nSens-HT-ENS with nLink-Modbus, range 0-100% RH and -20 to +80°C, accuracy ±0.5% RH and ±0.1K.
  • Differential Pressure: Pascal ST/Z, range 0 to +200 Pa, accuracy < ±0.3% FS, automatic zero point calibration.
Communication and Power:
  • Modbus Protocol: RS485/RTU with selectable baud rates (4800 to 38400 Bit/s).
  • Power Supply for Devices: 5-12VDC ±20% for sensors, 10.5-35VDC for pressure measurement.
Additional Notes: Technical data are subject to change without notice. Further specifications are available on product-specific data sheets.
See more

Catalog excerpts

Application Flyer - Measurement/Visualisation/Control-1

Application: Measurement - Visualisation - Control measurement - visualisation - alerting - documentation Measurement at critical point - at "Point of Action", with correct accuracy Central visualisation - all parameters and statuses at a glance Alerting and documentation - directly on-the-spot and sent to PLC / control station Visualisation Sensors E.g. at clean room entrance, at working places etc. QuantaDat transmitter 1x nSens-HT (temp. & humidity) 1x nSens T (temperature) Differential pressure Pascal-ST/Z Touch panel quick facts • • • • Flush mounting without any edges Low mounting depth <50mm H2O2 resistant, washable front panel Acoustic and optical alerting Touch panel I/O Input: 4x mA or V 4x relay switches Modbus RTU (Master) Output: 2x relay switches Modbus RTU and TCP/IP (slave) Novasina AG, Neuheimstrasse 12, 8853 Lachen, Switzerland Telephone +41-55-642 67 67, Fax +41-55-642 67 70, e-mail: [email protected], www.novasina.com

 Open the catalog to page 1
Application Flyer - Measurement/Visualisation/Control-2

Technical data: CIC-Touch clean room display Article no. Display Operation Dimensions front panel Dimensions for mounting Power supply Power consumption Operating temperature Inputs Outputs Storage 260 0941 Graphical 3.5" TFT display (70*52mm) Touch-screen capacitive 150*120mm (H2O2 resistant) Height 127; Width 107; Depth 50mm incl. connector 24 V AC/DC 12VA -10 to +50°C 4x relay switches potential-free 4x 0/4 - 20mA or 0/2-10V analogue signals Modbus RTU (master function) 2x relay switches 230V Modbus RTU or Modbus TCP/IP (slave function) SD card for firmware update/configuration (no data logging)...

 Open the catalog to page 2

All Novasina AGnsens-ht-eis catalogs and technical brochures

  1. LABTOUCH-AW

    1  Page

  2. LABSTART-AW

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.