Catalogue 2017 - HVAC measurement instruments - Maxx series
7Pages

HygroMaxx R/S/M High performance measuring instrument with large LCDisplay for air relative humidity and temperature. For installations in rooms or ducts. The digital capacitive humidity measurement cell in conjunction with a newly developed sensor technology, enable this device to be used in various applications for measuring climatic parameters. Operation is effected via 3 keys and an intuitive menu. The HygroMaxx transmits 2 analogue outputs for relative humidity and temperature. These can be scaled as required. Optimal integration into a control system can therefore be achieved. The HygroMaxx is available in different versions for room and duct measurement. Display Functions Adjustment Measurement principle freely scalable output-characteristic curve operated by integrated configuration menu 2 line display RH and Temp. contemporaneously, error/menu control display, dimensions 60x30 mm units °C / °F, adjustment at 3 humidity points and 1 temperature point, scalable analogue outputs, moving average display %, 1, 3 hours, keylock by password checkable and adjustable at any time at 3 RH points using the proven Novasina humidity standards SAL-SC RH: digital capacitive CMOS-Sens® technology Temp.: digital PN barrier layer Measurement instrument HygroMaxx: Dimension : 110 x 118 x 50mm Probe length S-type: diam.13 x 58 mm Probe length R-type: diam.13 x 250 mm Humidity measurement: CMOS-Sens technology, digital capacitive Measurement range : 0...100 % RH Reproducibility : ± 1.0 % RH Sensor Checks SAL-SC: Humidity standards based on saturated salt solutions in plastic cylindrical containers. For multiple use, with „Cellgard“ humidity permeable membrane. For values: 11%, 33%, 53%, 75%, 90% RH HygroMaxx Humidity/temperature transmitter for HVAC and process controls with local LCDisplay. The HygroMaxx product series have been developed following the newest technology in monitoring and controlling in the HVAC sector. These products represent an ideal combination of performance and price. The new sensor technology, the configuration possibilities and the robust design set a new standard in the HVAC field. Thanks to the new design conception, these instruments are easy for installation and maintenance. Integrated menu functions facilitate the startup, service resp. the RH adjustment with the Novasina SAL-SC humidity standards. Furthermore this product can be easily customised and adapted to specific needs (OEM versions). Applications: • HVAC process-control and -monitoring • Paper and textile manufacturing and handling • Controls and monitoring systems in labs and metrology rooms • Monitoring of industrial combustion processes • Storage and archive monitoring in museums and libraries • Storage systems, cooling rooms in the food & pharma industry 005534.00 01.01.2017 Climatic Process measurement instruments - 2017&nb

novasina HygroMaxx instrument types HVAC and industry transmitter system HygroMaxx S (for wall mounting) Humidity/Temperature measurement instruments for rooms HVAC transmitter with stylish designed, robust, two-part plastic housing. Ideal for room measurements, monitoring and controlling of climatic parameters. 24 VDC power supply (no galvanic separation), 2 analogue outputs (U or I) for temperature and relative air humidity. The cable entry easily made via the housing’s underside. The device is fixed with 4 screws to the wall. The big LCDisplay allows a good readability, even from the...

HVAC line - relative humidity/temperature HYGROSTAT The Novasina StatMaxx is a state-of-the-art hygro/thermostat for effective control applications for relative air humidity and air temperature. The configuration is made by 3 front buttons and an intuitive menu structure directly on the device. The alarm and control function drive an integrated relay switch for turn on/off an heater or humidifier. If you need data monitoring, there is an integrated bus interface (UMB - Universal Measurement Bus) implemented. This characteristics make the StatMaxx very versatile for climatic controls,...

StatMaxx S / R / M HVAC and industry transmitter system StatM axx S (for wall mounting) Hygrostat with robust, plastic housing and robust design for wall mounting with integrated sensor shaft. Ideal for use in rooms. Power cable can be easily inserted via the housing underside. The device is fixed with 4 screws. UMB bus tot. length: max. 150m (4 units +Datalog) Main menu functions are: calibration; alarm, delay and hysteresis settings; configuration of the UMB (Universal Measurement Bus). Dimension: 110 x 118 x 50mm Probe: diameter 13 x 58 mm Weight: 220 g Power supply: 24 VDC ±...

Accessories HygroMaxx & StatMaxx Duct mounting kit Duct mounting flange for easy and tight mounting to ducts or through walls/ceilings incl. sealing O-ring.Installation with 3 screws.The 13mm tight flange hole resists an overpressure of 3 bars. Sensor can be removed at any time for adjustment. -> Diameter fixation range: diam. 10 ...14 mm Installation range : diam. 9...14 mm 252 4468 Wall mounting Clip Wall mounting kit 13 mm (for HygroMaxx M type external sensor) Wall mounting clips (2 pcs) for the fixation of the SensMaxx 13 probes to walls with M4 wood, plastic or metal screws. Clips can...

Adapter SAL-SC for sensors with diameter 13 mm This adapter is needed for calibration of a system with sensor diameter 13 mm. It ensures an airtight fixation of a SAL-SC check to the sensor top (measurement cell area). It reduces the diameter of 20 mm to 13 mm and ensures an airtight seal. -> The adapter should be first mounted on the sensor top and then putted the SAL-SC check on it. Both seals should be carefully checked, leaks will bias the calibration. Material : Thermoplastic resin Thermal insulation styrofoam box For the SAL-SC sensor checks A styrofoam box providing optimal...

Remote sensor for StatMaxx M Spare remote sensor with 3m cable. Duct mounting flange not included. Recommendation: switch off the power supply before you replace the sensor Dimension : 0 12,7 x L 250 mm Cable : 3m with free wire endings ! Weight : 150 g Housing : stainless steel with protection filter Housing bottom Dimension : 110 x118 x 35 mm As spare part for damaged housings. Weight : 80 g Material : PVC 252 3135 housing bottom 252 4210 power supply EU/US/JP Options External power supply External primary power supply, for voltage range 90 to 264 vAc with exchangeable plugs...