TUBEINSPECT system
4Pages

TUBEINSPECT TM system For non-contact 3D metrology of tube ID and OD Measurement with non-contact sidelooking probe Optical fiber to system interferometer Inside diameter measurement Outside diameter measurement ✓ Wide range of micron-precision 3D measurements of tube interiors and exteriors • • • • • 3-dimensional geometry (GD&T) of inside and outside surfaces Chatter measurement Roughness measurement Defect detection - porosities, cracks, scratches Thickness measurement of semi-transparent material coatings ✓ Fully configurable automated inspection ✓ Easily integrated in fully automated insp

3D measurements of diameter, circularity, cylindricity, parallelism, taper, runout, straightness, cone angle, concentricity of ID & OD surfaces, roughness, chatter, defects, etc. Measures high-aspect-ratio features such as undercuts, cross-holes, chamfers, rifling, threads, O-ring grooves, and edges Reduced inspection cycle time: up to 100,000 measurements per second, each representing a 3D topographic point Flexible options for evaluating inspected parts with third party software: measured features can be compared to CAD or to user-defined set of locations, nominals, and tolerances Simple...

MICROCAMTM interferometer The interferometer provides the light source to the optical probe and processes the optical signal received from the probe. The probe and the interferometer are connected with an optical fiber. MICROCAM interferometer models MI CR OC AM -3 D General characteristics Technology low-coherence interferometry Light wavelength Size of interferometer enclosure box (depth x width x height) Non-contact measurements Scanning depth range options* Acquisition (A-scan) rate Axial (Z-axis) resolution Light spot size (Lateral [XY-axis] resolution) Standoff distance 0.5 - 100 mm...

Hardware for multiplexing support (optional) Optical switches are available for multiplexing up to 8 probes to a single Microcam interferometer. Multiplexed probes may be used one at a time. This option brings additional return on investment (ROI) to many installations. System software The TUBEINSPECT system comes with NOVACAM high-performance data acquisition software, which is PC, Windows®-based, and user-friendly for scan programming. The TUBEINSPECT system simultaneously generates 3 data sets from the same scan: 3D point cloud, light intensity image, and height image. The height and...