NOVACAM Barrel Analysis PolyWorks® Package
1Pages

NOVACAM TM Barrel Analysis PolyWorks® Package ✓ Novacam-developed extension for PolyWorks® Inspector software ✓ Supports 3D data analysis of barrel and chamber interiors ✓ Speeds up and fully automates the repetitive tasks of data processing and go-no-go reporting ✓ Package licence is available as an option with NOVACAMTM 3D metrology systems for barrel measurement Rifle Barrel Inspection Assistant provides dialog forms to easily set up scanning and inspection parameters for data processing in PolyWorks. Define scan locations, nominals, and tolerances for standard inspections. Rifling inspection callouts - bore and groove diameter, land and groove width, groove depth, number of grooves, flank angles*, rifling twist rate (constant and progressive), barrel straightness Chamber inspection callouts - chamber diameters, chamber section lengths, cone angles and concentricity, shoulder lengths and angles, radii Generic rifling and chamber report templates are fully customizable. Roughness (Ra) callouts *For direct measurement of flank angles < 60˚; available with systems that include NOVACAMTM MICROCAMTM-4D interferometer. Novacam Technologies Inc. 1755 Blvd. St Regis, Suite #130 Dollard-Des-Ormeaux, QC, H9B 2M9, Canada For more information, email info@novacam.com / call 514-694-4002 / toll-free 1-866-694-4002 or visit www.novacam.com ©2021 Novacam Technologies Inc. All rights reserved. Document: SW-BARRELS-PWKS-PCKG-1.0 (2021-09-14) NOVACAM and MICROCAM are trademarks of Novacam Technologies Inc. PolyWorks is a trademark of InnovMetric