BOREINSPECT
5Pages

BOREINSPECT TM system For non-contact 3D metrology of tube and bore IDs Measurement with non-contact rotational probe Connection to system interferometer and motion controller Z-axis motion ✓ Wide range of micron-precision 3D measurements inside hard-to-reach spaces • • • • • 3-dimensional geometry (GD&T) inside tubes, bores, barrels, dies, between blades, etc. Chatter measurement Roughness measurement Defect detection - porosities, cracks, scratches, and burrs Thickness measurement of semi-transparent material coatings ✓ Fully configurable automated inspection ✓ Easily integrated in fully automated pro

3D measurements of diameter, circularity, cylindricity, parallelism, taper, runout, straightness, cone angle, roughness, etc. Measures high-aspect-ratio features such as undercuts, cross-holes, chamfers, rifling, threads, O-ring grooves, and edges Reduced inspection cycle time: up to 100,000 measurements per second, each representing a 3D topographic point Flexible options for evaluating inspected parts: measured features can be compared to CAD or to user-defined set of locations, nominals, and tolerances Simple scan definition and execution: The scanning sequence defined once by teaching...

The rotational scanner advances and spins the side-looking optical probe selected to suit the application. The RS housing enclosure is robust and shop-floor ready. Range of bores inspected Distinguishing aspect Ideal for applications involving extra-small bores, where userexchangeable probes are required Ideal for extra-wide bores Lightest model, with the fastest rotational speed and the most popular for a wide variety of applications Motion and displacement capability Rotation + linear (Z-axis) + optional X/Y axis User-replaceable probes Extended range option available with...

MICROCAMTM interferometer The interferometer provides the light source to the RS probe and processes the optical signal received back from it. The RS and the interferometer are connected with an optical fiber. MICROCAM interferometer models M I CR OCA M -3 D General characteristics Technology low-coherence interferometry Light wavelength Size of interferometer enclosure box (depth x width x height) Non-contact measurements Scanning depth range options* Acquisition (A-scan) rate Axial (Z-axis) resolution Light spot size (Lateral [XY-axis] resolution) Standoff distance 4.1 - 146 µm, typically...

Hardware for multiplexing support (optional) Optical switches are available for multiplexing up to 8 probes to a single MICROCAM interferometer. Multiplexed probes may be used one at a time. This option brings additional return on investment (ROI) to many installations. System software The BOREINSPECT system comes with NOVACAM high-performance data acquisition software, which is PC, Windows®-based, and user-friendly for scan programming. The system simultaneously generates 3 data sets from the same scan: 3D point cloud, light intensity image, and height image. The height and light intensity...