OUR POWER, YOUR SATISFACTION SEALING SYSTEMS AND SEALS DIAMOND SERIES

Packing Seal B01 Standard packing seal with PTFE impregnated seals, at low friction coefficient per pack. Low cost installation solution Suitable to process products with suspended solids and abrasives. Pressure: up to 2 bar for clean fluids; 0,5 bar for fluids with suspended solids. Packing Seal With Flushing B02 Packing seal with low friction coefficient rings and flushing rings. Flowing pressure must be from 0.5 to 1 bar over the pressure inside the casing and compatible with the process liquid. Suitable to process many abrasive products. Pressure: up to 2 bar for clean fluids; 0,5 bar for...

Progressing cavily pumpr Single Mechanical Seal + Quench Q0K9 In compliance with single mechanical seal specifications, the flow is not pressurised, making this seal suitable in pumps with an inverse rotation direction such as vertical pumps and in all those applications in which the product has solid, crystalline or abrasive residue. Double Mechanical Seal Back to Back D0K9 The faces are not in contact with the product. The flushed liquid must be compatible with the process liquid and it is necessary for flushing pressure to be over 1 bar compared to that of the body of the pump. Suitable to...

Diamond Hygienic Series Diamond hygienic pumps were designed in single mechanical seal configurations, therefore not including a packing assembly. The position was also reviewed of the seals, advancing them (if internal) and positioning them under the suction for complete engagement of the process product. A new seal configuration was also added compared to the previous Diamond Industrial Series, i.e. the external single seal is then emerged in the process product. Internal Single Mechanical Seal Composed of a stationary part and a rotating part. Positioned under suction for greater engagement...

f'T' NOVA ROTORS Pr ngTH-asing cavity pumpc Double Mechanical Seal Back to Back D0K9 The faces are not in contact with the product. The flushed liquid must be compatible with the process liquid and it is necessary for flushing pressure to be over 1 bar compared to that of the body of the pump. Suitable to process products with solid, abrasive, aggressive and crystalline parts. Pressurejwhen empty 16 bar. Double Mechanical Seal in Tandem K0K9 Similar to a seal with “quench”. The difference is the type of seal. In a seal in tandem, the seals are two singles so that if one breaks, the second ensures...

Le tenute meccaniche a componente Mechanical Seal Series 050 type -051-052 Double directional mechanical seal with cylindrical single spring, unbalanced with elastomer bellows, suitable for general services machinery with low to medium pressure. Contact surface material Silicon carbide - Tungsten carbide Ellastomer material FPM – EPDM – NBR Metal parts AISI 304 – AISI 316 Mechanical Seal Series 110 type 110 Balanced mechanical seal with incorporated shaft sleeve, double directional with single leaf spring. Thanks to the geometry of the design, the spring never works in contact with the product,...

Le tenute meccaniche a cartuccia Cartridge Mechanical Seal Mechanical cartridge seal engineered for the Diamond series. The various configurations enable use of a wide range of applications, from medium to heavy use. The fundamental advantage is the quick replacement and regeneration of the worn seal making it economically beneficial in the short to medium term. The single seal is available in configurations with quench, double back to back and double in tandem. Contact surface material Silicon carbide - Tungsten carbide - Graphite Ellastomer material FPM – EPDM – NBR – FFPM – PTFE Metal parts...

''T' NOVA ROTORS Progressing cavily pumps Via Carlo Cattaneo, 19/25 36040 SOSSANO (VI) ITALY Telephone: +39-0444-888151 E-mail: [email protected] Website: www.novarotors.com